Abstract:The geometry of joints has a significant influence on the mechanical properties of rocks. To simplify the curved joint shapes in rocks, the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations. In this study, the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample, respectively. To describe the joint geometry, the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models. For comparison tests, the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method. The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints. The presence of joints reduces the uniaxial compressive strength (UCS), elastic modulus, and released acoustic emission (AE) energy of rocks by 37%–67%, 21%–24%, and 52%–90%, respectively. Compared to the simplified joint sample, the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints. The UCS, accumulative released AE energy, and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample. The UCS value of the simplified joint sample (i.e. 38.5 MPa) is much lower than that of the CT-based sample (i.e. 72.3 MPa). Additionally, the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample. CT scanning provides a reliable means to visualize the joints in rocks, which can be used to verify the reliability of photogrammetry techniques. The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.

THREE DIMENSIONAL ROCK JOINT NETWORK MODELLING WITH APPLICATION TO THE THREE GORGES PROJECT

Generation method of three-dimensional joint solid models based on generative adversarial networks

3D Solid Model Generation Method Based on a Generative Adversarial Network

Method for Visualizing the Shear Process of Rock Joints Using 3D Laser Scanning and 3D Printing Techniques

Investigation on Strength and Stability of Jointed Rock Mass Using Three‐dimensional Numerical Manifold Method

3D Morphology Reconstruction of Rock Joints from 2D Profile Measurement by a Profilograph

Technical path of model reconstruction and shear wear analysis for natural joint based on 3D scanning technology

Three-dimensional finite element simulation and reconstruction of jointed rock models using CT scanning and photogrammetry

Three-dimensional geological multi-body modeling from netlike cross-sections with topology

Joint Network Simulation and Its Applications Using MATLAB

A precise modeling method of three‐dimensional discrete fracture network based on rectangular joint model

Three-dimensional Geological Modeling from Topological Cross-Sections

Three-Dimensional Discrete Element Analysis of Jointed Rock Slope Stability Based on the Universal Elliptical Disc Model

Modeling wave propagation across rock masses using an enriched 3D numerical manifold method

Three-dimensional Geological Modeling in Mining Area and Its Geomechanical Applications

An Efficient Method for High-Precision 3D Geological Modeling from Intersected Folded Cross-Sections

Investigating the Influence of Joint Angles on Rock Mechanical Behavior of Rock Mass Using Two-Dimensional and Three-Dimensional Numerical Models

Generation and Verification of Three-Dimensional Network of Fractured Rock Masses Stochastic Discontinuities Based on Digitalization

Model of Damage Fracture and Damage Rheology for Jointed Rock Mass and Its Engineering Application

A New Method for 3D Geological Reconstruction from Intersected Cross-Sections

A 3D microseismic data-driven damage model for jointed rock mass under hydro-mechanical coupling conditions and its application