Abstract:Although there are various methods to measure the modulation transfer function (MTF) of charge-coupled devices (CCD). the interferometric fringe pattern method has advantages over others, such as canted slit sources, bar targets, knife-edge, laser-speckle patterns, random noise pattern, etc. Our interferometric method is relatively simple and versatile: It requires no critical optics and no focusing or precision alignment, the entry array is tested, the contrast ratio of the test pattern is high enough, the spatial frequency of the fringe pattern can vary continuously. Our method generates the formation of a sinusoidal intensity fringe pattern by the interference of two monochromatic plane waves, and straightforward projects it onto the CCD array under test. The construction of the experimental device is based on the Fresnel Double-Mirror structure. A 2.5 mw He-Ne laser with the wavelength of 632.8 nm is used as the light source, the laser beam is spatially filtered by a 10 mu m pinhole and expanded to a diameter of 30 mm, and the resulting wave front is divided by two mirrors, which incline to each other at a small angle, and interfered. One of the mirrors is rotatable to vary the frequency of the pattern. The CCD array is mounted on a stage, which is also rotatable to make that the CCD array takes different angle with the fringe pattern direction, to receive the patterns. With the method we provided, the spatial frequency can be extended to some 2 times the Nyquist frequency of the CCD array to study the aliasing effect. In the Cartesian coordinates, the x- and y- axis MTFs (at angle 0 degrees and 90 degrees) of the CCD array were measured, the other three MTFs (at angle 26.56 degrees, 45 degrees and 63.44 degrees), which nobody has done before, were also tested offering a more comprehensive characterization of the CCD array.

Dynamic Measurement Technique for Optic Fiber Interference Fringe

Modulation transfer function measurement of charge-coupled devices using frequency-variable fringe patterns

Threshold-optimized Dithering Technique for High-quality 3D Shape Measurement

Actively stabilized optical fiber interferometry technique for online/in-process surface measurement.

Analysis and improvement of dynamic range in a time-division-multiplexing interferometric fiber-optic sensor array

Study on an Automatic Processing Technique of the Circle Interference Fringe for Fine Interferometry

Vibration signal processing for interferometric optical fiber sensor

A New Demodulation Method to Improve the Sensitivity and Dynamic Range of Fiber Optic Interferometric System

Development of an Interferometric Fiber-Optic Sensor and Its Array′s Divide/Combine Polarization-Induced-Fading Eliminated Technique

A Analysis about the Error Which Using Linear Ccd to Measure the Interference Fringe

Research on automatic interference fringes processing for measurement of length of surface standard by lnterferometry

Demodulation Method for Composite Modulation Caused by Dynamic Optical Path in FSI Optical Frequency Tuning

An Optic-Fiber Interferometer for the Dynamic Characterization of Microstructures.

Fiber Interferometer Spectrum Recognition Strategy for Sensitivity Enhancement and Wide-Range Wavelength Measurements

A Novel All-Fiber Velocity Measurement System with High Fringe Contrast

Auto-Elimination Of Fiber Optical Path Length Drift In A Frequency-Scanning Interferometer For Absolute Distance Measurements

Performance Improvement on the Measurement of Electro-Optic Coefficients of Poled Polymers Using the Optical Fiber Mach-Zehdner Interferometer

Nonlinearity-suppressed Micro-Probe Fiber Optic Interferometer for Accurate Long-Range Displacement Measurements

Research on Reflective Polarization Phase-Shifting Dynamic Point Diffraction Interferometry

Study of polarization-insensitive fiber optic michelson interferometric sensors

Novel Method for Processing Data of White Light Interference Spectrum