Debonding Detection of Thin-Walled Adhesive Structure by Electromagnetic Acoustic Resonance Technology
Ne Liu,Shiqiang Shen,Ying Zhu,Ying Gao,Yongdong Pan
DOI: https://doi.org/10.3390/ma17205073
IF: 3.4
2024-10-18
Materials
Abstract:The detection of debonding defects in thin-walled adhesive structures, such as clad-iron/rubber layers on the leading edges of helicopter blades, presents significant challenges. This paper proposes the application of electromagnetic acoustic resonance technology (EMAR) to identify these defects in thin-walled adhesive structures. Through theoretical and simulation studies, the frequency spectrum of ultrasonic vibrations in thin-walled adhesive structures with various defects was analyzed. These studies verified the feasibility of applying EMAR to identify debonding defects. The identification of debonding defects was further examined, revealing that cling-type debonding defects could be effectively detected using EMAR by exciting shear waves with the minimum defect diameter at 5 mm. Additionally, the method allows for the quantitative analysis of these defects in the test sample. Due to the limited size of the energy exchange region in the transducer, the quantitative error becomes significant when identifying debonding defects smaller than this region. The EMAR identified debonding defects in clad-iron structures of rotor blades with a maximum error of approximately 15%, confirming its effectiveness for inspecting thin-walled adhesive structures.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering