Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Study on Stator Slot Wedge Based on Plank Model and Its Characteristic Parameters

Study and Detection on Loose Stator Wedge in Large Generator

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

A New Method for Stator Slot Wedge Testing of Large Generators

Dynamic Analysis and Detection of the Stator Wedges' Looseness of Large Generators

Laboratory Studies of a New Stator Slot Wedge Tester for HV Generators

A System for Detecting Loose Stator Wedges in Large Generator

Analytical Modeling and Finite-Element Computation of Radial Vibration Force in Fractional-Slot Permanent-Magnet Brushless Machines

Electromagnetic Force on Individual PM Modules for Immobilization in Fractional-Slot Surface-Mounted PM Wind Generator

Analytical Kinetic Model for Accurate Square-slot Stator Natural Frequency Prediction

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

A Dsp Based Stator Slot Wedge Tester for Large Generators

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Study on Stator Winding Degradation under Bar Vibration

Investigation and Analysis of the Influence of Magnetic Wedges on High Voltage Motors Performance

Principles and Characteristics of Vibration Sparking in High Voltage Stator Slots

Vibration Reduction by Magnetic Slot Wedge for Rotating Armature Permanent Magnet Motors

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Design to reduce electromagnetic vibration in integral-slot SPM machine considering force modulation effect

Identification of Laminated Core and Winding's Physical Parameters by Stator's Modal Testings

Dangerous Results and Detection Methods of Loose Stator Slot Wedges of Large Generator