Abstract:We report the operation and the theoretical modeling of an efficient, tunable, and low-loss single mode fiber coupler. The coupler design follows a scheme previously reported, in which two optical fibers mounted in curved grooves in separate quartz substrates are polished until sufficient cladding material has been removed to permit optical coupling between the mated polished faces of the fibers. The results of a computer analysis of the distributed coupling taking place between the fibers are discussed, emphasizing the intuitive dependences of the coupling coefficient and effective interaction length of the device on its geometrical parameters. A detailed experimental analysis of fiber couplers follows in which we characterize two types of couplers made with different brands of single-mode fibers. Operation up to 100 percent coupling ratio and 50 dB extinction ratio between coupled and direct branch as well as operation in overcoupling regimes are demonstrated, both at visible and infrared signal wavelengths. Tuning curves are shown that emphasize the excellent tunability properties of such couplers in which the coupling ratio can be smoothly and continuously tuned between 0 and 100 percent. Experimental evidence of the relatively low loss level and very low polarization dependence of the fiber couplers are also presented. All experimental results, including an analysis of the influence of the refractive index of the intermediate layer of index-matching liquid between the polished faces of the fibers, are found to be very well predicted by our theoretical model.

Analysis And Test Of The Coupling Mode In The Bend Single-Mode Fiber

Modeling bending losses of optical nanofibers or nanowires.

Bend loss measurements on high numerical aperture single-mode fibers as a function of wavelength and bend radius

Study of mode propagation with 632.8-nm laser in tapered fiber

Micro-Bending Influence on Mode-Dependent Loss

Bending losses of coated single-mode fibers: a simple approach

Coupled mode theory analysis of mode-splitting in coupled cavity system.

Bend loss in single-mode fibers

Theoretical and Experimental Study of Macrobending Loss of the Single-Mode Fiber

Measurement of the intermodal crosstalk of a bent multimode waveguide.

Resonant Bend Loss in Leakage Channel Fibers

Design and theoretical analysis of broadband bend-resistant low-loss hollow-core anti-resonant fiber

Mode Coupling Strength in A Microsphere Cavity Coupled with Fiber Taper

Macrobending Loss Measurements of G.657 Fiber with Suppression of Ripple Effect Induced by Whispering Gallery Modes

Bending-Induced Optical Loss in Random-Hole Optical Fibers

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Analysis of Power Transfer Characteristics Among Many Parallel Optical Fibers

Design of ring-core few-mode multi-core fiber with low crosstalk and low bending loss

OTDR-based optical fiber bending and tensile loss analysis

Loss Analysis of Arbitrary-Bending Mono-Mode Fiber

Analysis of a tunable single mode optical fiber coupler