Abstract:The entrance effect has an important influence on the heat transfer characteristics in microchannels. It is necessary to determine the influence to design microchannel heat sinks properly. In this work, the simultaneously developing flow and convective heat transfer were investigated numerically inside circular and parallel-plates microchannels. The effects of the Knudsen number (0–0.1) and Peclet number (25–1000) on the local Nusselt number were taken into consideration in the slip flow regime. The numerical results were calculated via an incompressible and steady computational fluid dynamics algorithm under the boundary conditions of the velocity slip and temperature jump. The user-defined functions were used to achieve the velocity slip boundary condition, and a thermal resistance model was first proposed to easily impose the temperature jump boundary condition. The numerical approach was verified using both the analytic solutions of the thermally developing flow and the exact solutions of the fully developed flow, which was then employed to obtain the influences of the axial heat conduction and the rarefaction on the local Nusselt number of the simultaneously developing flow. The results of the apparent friction factor and the heat transfer coefficient were graphically presented as functions of the Knudsen number, Reynolds number or Peclet number, and non-dimensional axial length. It was found that the effect of the axial heat conduction on the entrance effect can be ignored when Pe > 500. The heat transfer performance of the simultaneously developing flow can be predicted by the results of the thermally developing flow when the Knudsen number is large enough. General correlations were also proposed for the apparent friction coefficients, local Nusselt number in circular and parallel-plates microchannels.

Laminar heat transfer of gas in extremely narrow parallel plates with one wall temperature constant and the other adiabatic

Laminar Heat Transfer of Gas in a Parallel‐plate Microchannel with One Wall Temperature Constant and the Other Adiabatic

Laminar heat transfer of gas in microchannels between two parallel plates

Convective heat transfer for incompressible laminar gas flow in micropassage with constant wall temperature

Laminar Flow Of Gas Through Extremely Narrow Parallel Plates

‘Wall-adjacent layer’ analysis for developed-flow laminar heat transfer of gases in microchannels

Wall effect of gas laminar heat transfer in microtubes

New Poiseuille-Couette Flow Of Variable Viscosity Fluid In Microscale Gap Between Parallel Plates

Numerical Simulation for Laminar Flow and Heat Transfer of Gas in Rectanglar Micropassages with Constant Wall Heat Flux

A Model for Predicting Laminar Gas Flow Through Micropassages

Lattice-Boltzmann Method for Gas Flow in Microchannels

Variable Permeability Effects on Natural Convection in a Vertical Porous Layer with Uniform Heat Flux from the Side

Experimental Analysis of the Influence of Wall Axial Conduction on Gas-to-gas Micro Heat Exchanger Effectiveness

Analysis of transient laminar forced convective heat transfer in parallel-plate channels with time-varying thermal boundary conditions of the inlet and wall

Movement of Impingement Heat Transfer by A Single Circular Jet with A Confined Wall

Laminar forced convection heat and mass transfer of humid air across a vertical plate with condensation

Laminar to turbulent flow transition inside the boundary layer adjacent to isothermal wall of natural convection flow in a cubical cavity

A Fundamental-Study of the Heat-Transfer and Flow Situation Around Spacers (A Single Row of Several Cylindrical Rods in Cross Flow)

Thermal Drag and Critical Heat Flux for Natural Convection of Air in Vertical Parallel Plates

A Molecular Dynamics Simulation on the Convective Heat Transfer in Nanochannels

Simultaneously developing flow and heat transfer in circular and parallel-plates microchannels with velocity slip and temperature jump