Abstract:This paper presents the results of experimental and numerical investigation of forced convection of gas flows through stainless steel microtubes having inner diameters of 750 mu m, 510 mu m and 170 mu m. The study covers both transitional and turbulent flow regimes (3000<Re<12000). In these regimes the flow is highly compressible, inducing conversion from thermal energy to kinetic energy inside microtubes. Moreover, reverse energy conversion takes place immediately after the fluid is vented to the outlet chamber where the measurement of fluid outlet temperature is performed. In this work the effects of fluid compressibility on the forced convection at microscale is quantitatively discussed by combining experimental data with numerical predictions. It is evidenced that compressibility effects can distinctively enhance convective heat transfer in terms of Nusselt number. This enhancement turns out to be more pronounced for microtubes with smaller inner diameter even at medium Reynolds numbers. In order to explore in-depth the heat transfer mechanism, the system is numerically simulated adopting the Arbitrary-Lagrangian-Eulerian (ALE) method and the Lam-Bremhorst Low-Reynolds number turbulence model to evaluate eddy viscosity coefficient and turbulence energy. The crossing of the numerical data, which provide the local value of pressure and temperature, with the experimental ones helps to explain the physical sense of the experimental results. In addition, the convective heat transfer coefficients obtained in the present work are compared with both classical correlations validated for conventional pipes and the correlations proposed for gas flows through microtubes.

Wall effect of gas laminar heat transfer in microtubes

‘Wall-adjacent layer’ analysis for developed-flow laminar heat transfer of gases in microchannels

Effect of Molecular Interactions Between the Solid Wall and Liquid on the Flow Properties in Microtubes

Convective heat transfer for incompressible laminar gas flow in micropassage with constant wall temperature

Laminar heat transfer of gas in extremely narrow parallel plates with one wall temperature constant and the other adiabatic

Laminar heat transfer of gas in microchannels between two parallel plates

Effects of Axial Heat Conduction in the Wall on Convection in Microtubes

Laminar Heat Transfer of Gas in a Parallel‐plate Microchannel with One Wall Temperature Constant and the Other Adiabatic

A Model for Predicting Laminar Gas Flow Through Micropassages

Laminar Flow Of Gas Through Extremely Narrow Parallel Plates

Transitional And Turbulent Convective Heat Transfer Of Compressible Gas Flows Through Microtubes

Numerical Simulation for Laminar Flow and Heat Transfer of Gas in Rectanglar Micropassages with Constant Wall Heat Flux

Investigation of Convective Heat Transfer with Liquids in Microtubes

Regulation of Gas-Liquid Stratified Flow Boiling Dynamic Instabilities in Horizontal Tube: Effects of Heat Load Distribution and Wall Thermal Capacity

Micro Convective Heat Transfer of Gas Flow Subject to H and T Boundary Conditions

Molecular dynamics study of the influence of wall-gas interactions on heat flow in nanochannels

Experimental Analysis of the Influence of Wall Axial Conduction on Gas-to-gas Micro Heat Exchanger Effectiveness

Experimental study on the characteristics of resistance for gas flow in microtubes

Controlling gas–liquid flow and enhancing heat transfer in a T-junction microchannel by wettability-engineered walls

Variations in gas temperature and average velocity during laminar-turbulent transition in high-speed gas flow through microtubes

Experimental Analysis of Gas Flow Forced Convection in Microtubes