Abstract:Experiments were conducted to investigate the cavitation behavior of Helmholtz self-sustained oscillation jets. In this paper, highspeed photographic technology was used to capture the flow details of cavitation with various nozzle structures and operating pressures from 1.0 MPa to 3.0 MPa. Furthermore, an in-house code based on a matrix approach that processes gray values with various statistical methods was used to quantitatively evaluate the cavitation jet of waters generated by Helmholtz nozzles. The mean values of the normalized gray levels of the images were used as a metric to measure the lengths of the cavitation clouds. When the original data were smoothed by a 15th lowess filter to exclude the noise of the images, the periods of cavitation cloud shedding were obtained accordingly, and the average period had a magnitude of 10-4. All of the smoothed results of the original data captured a two-peak shape that comprises a large peak and a mild hump. Image processing results showed that the Helmholtz nozzle produced greater cavitation intensity than a traditional conical nozzle. The shear-layer instability waves disappeared within 10d1 downstream from the injector exit. The cavitation clouds propagated a distance of approximately 1–10d1 at various pressure ratios, and the clouds were continuous within this distance. The geometry of the nozzle strongly affected the length and shedding period of the cavitation cloud. As described in the discussion section of this paper, when the cavity length was doubled, the length of the cavitation cloud decreased approximately 26.5 %; however, the period of the cavitation cloud shedding increased approximately 10 %. The longest cavitation cloud appeared when the ratio of the cavity diameter and the upper nozzle diameter was eight. Excessively small or large diameters were not conducive to the development of cavitation, whereas the effect of the pressure ratio on the cavitation cloud length was positive. When other conditions remained unchanged, the lump shedding period decreased as the pressure ratio was increased to 25. When the pressure ratio exceeded 25, the cavitation cloud shedding period remained constant.

Vortex Cavitation Mechanisms in Shear Layer Flow

Ventilation Effects on Cavitation Erosion around a Hollow-jet Valve

High-speed photography and particle image velocimetry of cavitation in a Venturi tube

Study On Vortex Generators For Control Of Attached Cavitation

Experimental Measurement of Vortex Cavitation Around a Suction Pipe Inlet

Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump

Derivation of “double-loop” Theory and Mechanism of Cavitation-vortex Interaction in Turbulent Cavitation Boundary Layer

Mechanism analyses of the unsteady vortical cavitation behaviors for a waterjet pump in a non-uniform inflow

Coherent structure analysis of cavitation waterjets using dynamic mode decomposition

Numerical Simulations of Coherent Vortex Pairing in a Round Jet

Ventilation Effects on Cavitation Induced-Vibration

The Acoustics Of Cavitation In Spool Valve With U-Notches

Dynamics of cavitating tip vortex

Cavitating flow investigation in low specific speed axial flow waterjet pumps

Influence of Fluid Viscosity on Vortex Cavitation at a Suction Pipe Inlet

Study of the Mechanism of Cavitation in Inner-Hole Rotating Cavitators

The Dynamic Evolution of Cavitation Vacuolar Cloud with High-Speed Camera

Numerical analysis of vortex and cavitation dynamics of an axial-flow pump

High Speed Visualization of Self-Oscillation of Axisymmetric Cavitating Cavity in a Square Vortex Chamber

Dynamic characteristics of the cavitation clouds of submerged Helmholtz self-sustained oscillation jets from high-speed photography

Numerical Simulation of Three Dimensional Cavitation Shedding Dynamics with Special Emphasis on Cavitation–vortex Interaction