Abstract:Flow characteristics of turbulent impinging jets issuing, respectively, from a rectangular and a square nozzles have been investigated numerically through the solution of three-dimensional Navier-Strokes equations in steady state. Two geometries with two nozzle-to-plate spacings of four and eight times of hydraulic diameters of the jet pipes, and two Reynolds numbers of 20000 and 30000 have been considered with fully developed inlet boundary conditions. An RNG based k–ε turbulence model and a deferred correction QUICK scheme in conjunction with the wall function method have been applied to the prediction of the flow fields within semi-confined spaces. A common feature revealed by the computational results is the presence of a toroidal recirculation zone around the jet. An adverse pressure gradient is found at the impingement surface downstream the stagnation point. Boundary layer separation will occur if the gradient is strong enough, and the separation manifests itself as a secondary recirculation zone at the surface. In addition, three-dimensional simulations reveal the existence of two and four pronounced streamwise velocity off-center peaks at the cross-planes near to the impingement plate, respectively, in the rectangular and square impinging jet flows. These peaks are found forming at the horizontal planes where the wall jets start forming accompanied by two or four pairs of counter-rotating vortex rings. It is believed that the formation of the off-center velocity peaks is due to the vorticity diffusion along the wall jet as the jet impinges on the target plate.

Numerical Simulation of Rocket Impinging Jet on Flat Plate with a Hole

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

NUMERICAL SIMULATION OF LAMINAR SQUARE IMPINGING JET FLOWS

Numerical simulation on inner flow field of nonaxisymmetrical scarfed no{zle

Three-Dimensional Simulation of Turbulent Rectangular and Square Impinging Jet Flows

Numerical simulation under-expanded supersonic impinging jet

The Research on High-Speed Gas Jet of Rocket Nozzle Underwater

STUDY ON NUMERICAL SIMULATIONS OF A PLUG NOZZLE FOR ROCKET ENGINE

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Quadrature Method of Moments for Nanoparticle Coagulation and Diffusion in the Planar Impinging Jet Flow

Modelling Of Impinging Flow And Heat Transfer In A Confined Narrow Gap

Numerical simulation on three-dimensional subsonic impinging jet

Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in A Confined Narrow Gap

Direct Numerical Simulation Of An Impinging Jet Into Parallel Disks

Numerical Simulation of Inner Flow Field of a Pintle Injector Variable Thrust Rocket Engine

Based on Fluent Numerical Calculation of Refractive Index on Rocket Engine Nozzle Plume

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Direct Numerical Simulation Of An Impinging Round Jet Flow

Numerical simulation of nozzle flow based on Euler equation

Numerical Investigation of Separated Plug Nozzle Flow

Numerical Simulation of Conical Shaped Charge Jet Formation Process