Abstract:In order to predict flow behavior and find the optimum hot working processing parameters for 5754 aluminum alloy, the experimental flow stress data obtained from the isothermal hot compression tests on a Gleeble-3500 thermo-simulation apparatus, with different strain rates (0.1⁻10 s⁻1) and temperatures (300⁻500 &deg;C), were used to construct the constitutive models of the strain-compensation Arrhenius (SA) and back propagation (BP) artificial neural network (ANN). In addition, an optimized BP⁻ANN model based on the genetic algorithm (GA) was established. Furthermore, the predictability of the three models was evaluated by the statistical indicators, including the correlation coefficient (R) and average absolute relative error (AARE). The results showed that the R of the SA model, BP⁻ANN model, and ANN⁻GA model were 0.9918, 0.9929, and 0.9999, respectively, while the AARE of these models was found to be 3.2499⁻5.6774%, 0.0567⁻5.4436% and 0.0232⁻1.0485%, respectively. The prediction error of the SA model was high at 400 &deg;C. It was more accurate to use the BP⁻ANN model to determine the flow behavior compared to the SA model. However, the BP⁻ANN model had more instability at 300 &deg;C and a true strain in the range of 0.4⁻0.6. When compared with the SA model and BP⁻ANN model, the ANN⁻GA model had a more efficient and more accurate prediction ability during the whole deformation process. Furthermore, the dynamic softening characteristic was analyzed by the flow curves. All curves showed that 5754 aluminum alloy showed the typical rheological characteristics. The flow stress rose rapidly with increasing strain until it reached a peak. After this, the flow stress remained constant, which demonstrates a steady flow softening phenomenon. Besides, the flow stress and the required variables to reach the steady state deformation increased with increasing strain rate and decreasing temperature.

An ANN／GA(Artificial Neural Network／Genetic Algorithm)for Modeling and Optimizing of Liquid Metal Extrusion Process

Neural Network Modeling and Optimization of Semi-Solid Extrusion for Aluminum Matrix Composites

Reversing Design on Combined Parameters of Liquid-Solid Extrusion Process Based on the Predictive Model Using Hybrid GA-BP Algorithm

An intelligent system for low-pressure die-cast process parameters optimization

Optimization of LPDC Process Parameters Using the Combination of Artificial Neural Network and Genetic Algorithm Method

Modelling Optimisation of Hot Processing Parameters of Ti–6Al–4V Alloy Using Artificial Neural Network and Genetic Algorithm

Fuzzy Neural Network Modeling of Liquid-Solid Extrusion Process for Composite Products

Research on GA-ANN Integration and Its Applications to Cold Extrusion Process Design

Research on the Neural Networks Used for Shaping Tubes by the Liquid Extrusion Process

A Hybrid Ga-Bp Algorithm For The Predictive Model Of Multi-Parameters Of Liquid-Solid Extrusion Process

A Prediction Model for Additive Manufacturing of AlSi10Mg Alloy

Optimization of Thermal Stress and Deformation of the Casting During Solidification by Neural Network and Genetic Algorithm

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

Finite Element Modeling Optimization for Aluminum Alloy Casting Solidification Process Based on Neural Network

Optimization of Ultra-High and High Manganese Steel Based on Artificial Neural Network and Genetic Algorithm

A Hybrid Approach for Processing Parameters Optimization of Ti-22Al-25Nb Alloy During Hot Deformation Using Artificial Neural Network and Genetic Algorithm

Optimization of Metal Inert-Gas Welding Process for 5052 Aluminum Alloy by Artificial Neural Network

Modeling the Hot Deformation Behaviors of As-Extruded 7075 Aluminum Alloy by an Artificial Neural Network with Back-Propagation Algorithm

Optimization Approach for Processing Design in the Extrusion Process of Plastic Profile with Metal Insert

Composition design of high-performance copper alloy by coupling artificial neural network and genetic algorithm