Abstract:Near-infrared spectroscopy is often used for the non-invasive detection of composition in the human body, such as that of blood glucose and haemoglobin, due to its high penetration depth into tissues. Although it is feasible to position the optical probe precisely, contact situation between probe and human tissues is a difficult problem to determine because of physiological tremor and mechanical performance of bio-soft tissue. Here, we proposed a novel estimation method for the situation between the optical probe and tissue surfaces based on the dynamic auto-correlation matrix of two-dimensional correlation spectroscopy (2DCOS) and radar chart. The diffuse reflectance spectra from the left palm of 4 healthy volunteers were collected while the optical probe gradually approached and pressed bio-tissues with a custom-design controlling device. 2DCOS in the wavelength with lower absorption (1000-1400 nm) was calculated under the perturbation of relative-distance and contact pressure between the optical probe and tissue surface. The synchronous 2DCOS showed that the surface reflection and diffuse reflectance were greatly affected by the contact conditions in 1100 nm, 1220 nm, and 1300 nm. Then the dynamic auto-correlation matrix of 2DCOS was established for the adjacent spectra, and the significant difference wavelengths were used to build radar charts to determine the critical contact situation visually. Results showed that the maximum variations of dynamic auto-correlation matrix appeared at near 1300 nm, and the relative distance between the probe and tissue corresponding to the critical contact state can be easily observed with radar charts with 0.25 mm uncertainty, which was consistent with the self-feeling of each volunteer. So this method can be applied to exactly determine the optimal measurement status for the non-invasive body composition detection in vivo. It is important for the design of human-machine interface and the accuracy improvement of body composition measurements.

Method to Adjust the Measuring Attitude and Signal Processing for Optical Fiber Distance and Orientation Integrated Proximity Sensor

Robust-fusion Optic Fiber Distance and Orientation Integrated Sensing Technology

Study on Robust Quad-Eye Optical Fiber Proximity Sensing Technology for Robot

Study on the method to adjust the manipulating position of a fiber optic proximity sensor

Methods to enlarge the measurement range of robust quad-eye optical fiber proximity sensors

Mechanism of robust data fusion optic fiber distance and orientation integration sensor

Research on the Best Measurement Situation Between Optical Probe and Tissue Surfaces in Non-Invasive Detection.

Improving the Measurement Accuracy of Distance and Positioning for Capacitive Proximity Detection in Human-Robot Interaction

An Integrated Opto-electric Sensor for Multi-parameter Measurement

Optical Fiber Sensor Technology for Pose Warp in Robot Screw Flexible Assembly

Study Of The Integrated Opto-Electric Sensor

Intensity Compensation and Nonlinear Correction of Optical Fiber Sensor Using Neural Network

Integrated Optoelectric Sensor for Measurement of Microdisplacement, Roughness, and Microprofile

Study on the measuring system of the planar parallel micro-motion worktable's location and orientation

IR detector real-time optical alignment system based on image direct feedback

Study on Reducing the Precision Loss of A Portable Probe in Large-Scale Measurements

A New Parallel Mechanism for 6-DOF Micro Displacement and Orientation Measurement Based on Optical Fiber Flexure Hinges

A Position and Attitude Measurement Method Based on Laser Displacement Sensor and Infrared Vision Camera

Research on Real-time Measuring System about Position Posture of Motional Object with Four Beams of Laser and Position Sensitive Detector

Algorithm Of Single Camera Vision Coordinates Measuring Based On Features Imaging Of Optical Probe

Optical Probe Pose Estimation in the Vision Measurement