Abstract:To avoid the energy waste in the production of furnace grade phosphoric acid, a novel phosphoric reactor with circular water wall is designed, which could recover waste heat to produce superheated steam with the help of drum. A three-dimensional mathematical model of phosphorus combustion in the novel phosphoric reactor is developed by incorporating kappa-epsilon turbulence model, eddy dissipation combustion model and P-1 radiation heat transfer model. The streamline field distribution, temperature distribution and species concentration distribution are predicted by numerical simulation. The results show that phosphorus combustion mainly takes place in the injection zone of atomised phosphorus; the maximum combustion temperature and exit temperature are 1790 and 970 K respectively which conform well to practical datum. Meanwhile, the effects of parameters on maximum combustion temperature, smog exit temperature, maximum wall heat flux and averaged wall heat flux of the novel phosphoric reactor with circular water wall are also discussed, including phosphorus consumption, excess air coefficient, wall temperature and radiation absorption coefficient. The predicted results show that maximum combustion temperature, smog exit temperature, maximum wall heat flux and averaged wall heat flux will increase with increasing phosphorus mass flowrate when excess air coefficient is constant. Under the condition of constant phosphorus mass flowrate, the smog exit temperature will increase with increasing excess air coefficient and other parameters will decrease. Wall temperature has a remarkable effect on the smog exit temperature, whereas its effects on other parameters are not obvious. In addition, radiation absorption coefficient has remarkable effects on maximum combustion temperature and maximum wall heat flux in the novel phosphoric reactor.

Recycle And Utilization Of Waste Heat From Burning Elemental Phosphorus In Preparing Phosphorus Acid

Waste Heat Recovery in the Production of Furnace-Grade Phosphoric Acid

Equipment to Reclaim the Waste Heat of Phosphoric Acid Production by Hot Process and Research on Combustion Temperature

Energy conservation and heat transfer characteristics of phosphorus reactor

Development and Cfd Simulation of A Novel Phosphoric Reactor with Waste Heat Recovery

Research on Protective Measures to High-Temperature Corrosion of a Novel Energy-Saving Phosphorus Reaction Tower

The Heat Recovery and Utilization in the Production of Furnace-process Phosphoric Acid

Simulation of Mass and Heat Transfer in New Phosphoric Acid Tower with Circular Water Wall(ⅰ)model Development

Thermal Economical Analysis and Waste Heat Reclamation in Two-Step Phosphorous Acid Production Process

Evaluation Method for Thermal Processing of Phosphoric Acid with Waste Heat Recovery

A review on the recovery and utilization of heat energy from combustion of phosphorus

Thermodynamic Analysis of Waste Heat Recovery in One-Step Phosphorous Acid Production by BEP

Experimental Research on a Process for the Recycling of Yellow Phosphorous Tail Gas to Produce Formic Acid

Remove and Recover Phosphorus During Anaerobic Digestion of Excess Sludge by Adding Waste Iron Scrap

Technique of Phosphorus Recovery from Dehydrated Sludge by Incineration

Self-anticorrosion for the Combustion Tower of Heat Recovered Thermal Process Phosphoric Acid Production

Technology and equipment for utilizing heat energy evolved from thermal-process phosphoric acid production

Sewage sludge as a fuel and raw material for phosphorus recovery: Combined process of gasification and P extraction

Waste Heat Recovery in the Coal-Fired Power Generation Integrated with Post-Combustion

Acid treatment enhances phosphorus release and recovery from waste activated sludge: Performances and related mechanisms

Phosphorus recovery from wastewater through microbial processes