Abstract:A new electrode configuration was proposed to improve the performance of color ac plasma display panels (PDPs). ITO electrodes on the front plate of a PDP were used as auxiliary sustain electrodes, which were electrically isolated from the metal electrodes by a dielectric isolation layer. When this type of PDP operates, the sustain voltage waveforms are only applied to the metal electrodes, so the ITO electrodes always lie in floating potentials. By numerical simulation, the microdischarge process in a PDP cell with floating auxiliary electrodes was analyzed, and the influence of the insulation layer thickness on the cell electrical parameters was investigated. It was found that a discharge in the cell was firstly generated at the narrow gap between a pair of floating electrodes, and then it grew into a long-path discharge including a positive column region between a pair of metal electrodes. Two 12-inch test panels having this floating-electrode-type cell structure were fabricated, together with two other test panels as references having a conventional cell structure and a regular long-gap cell structure, respectively, and their electrical and optical characteristics were measured and compared to each other. The results indicate that the PDP with floating electrodes can achieve a high luminance and a high luminous efficacy at a relatively low sustain voltage.

Study on the Intellectualized Interface Circuit of Color Plasma Display Panel

Design of a Scan Driver IC for Plasma Display Panel

Research and Implementation Process of a 42" PDP Scan Driver IC"

Study on Fabrication Techniques and Photodectric Properties of PDP Surface Light Source

High-voltage Integrated Circuit Technology for Plasma Display Panel Drivers

Study on Automatic Power Control in Color Plasma Display Panel

Study of Gray Correction of Color Plasma Display Panel

PPPS-2013: Overview of Plasma Display in China

A real-time image processor with combining dynamic contrast ratio enhancement and inverse gamma correction for PDP.

Study of Newly Developed Color AC Plasma Display Panel

Development of panel structure for a high-resolution 21-in-diagonal full-color surface-discharge plasma display panel

Combining Inverse Gamma Correction with Dynamic Contrast Ratio Enhancement for AC Plasma-Display-Panel

Line Repetition Technology of Color Plasma Display Panel

71.3: Flat‐Panel‐Display System Based on Interference Modulation for Both Intensity and Color

New Driving Method for Color Plasma Display Panel

A Real-Time Image Processor with Dynamic Error Diffusion Based on Edge Detection for Plasma Display Panel

Electrical and Optical Characteristics of a Color Alternating Current Plasma Display Panel with Floating Electrodes

Alternating Current Plasma Display Panel with Two Trigger Discharge Sites and Its Driving Techniques

A Method of Modifying Display Gray Levels for Reducing the Dynamic False Contour in Alternating Current Plasma Display Panel

Study on Improving Dynamic Contour False in Color Plasma Display Panel

Enhancement of Dynamic Low Gray Levels in Color Plasma Display Panel