Abstract:Aiming at the sensitivity of installation errors caused by the complete conjugated tooth surface of cycloidal bevel gear, a method of tooth surface mismatch design which only modified the pinion cutter along two directions was proposed. Firstly, the cutter head structure of cycloidal bevel gear and the tooth surface forming process of generating gear were analyzed, and the tooth surface equations of cuter and generating gear were deduced, and the complete conjugated principle of tooth surface was analyzed. Secondly, the calculation method of processing parameters for the complete conjugated tooth surface was established, and the pinion cutter parameters along two directions modification were solved, and the equation of cutter blade edge with circular arc modification was derived. Based on the position and motion relationship between the cutter head and workpiece, the basic mathematical model of cycloidal bevel gear by generating method was established, therefore the theoretical tooth surface equation of workpiece was derived. On this basis, the numerical solution of tooth surface was studied, and the flow chart of loaded tooth contact analysis of cycloidal bevel gear with finite element method was established by using the ABAQUS software. Taking a pair of cycloidal bevel gear as an example, the tooth contact analysis and loaded tooth contact analysis were carried out, and the influence laws of installation errors on loaded tooth contact area and loaded transmission error were analyzed. The simulation results showed that after pinion cutter modification there formed the crown mismatch relationship along tooth length and tooth profile direction between the gear and pinion tooth surface, and the shapes of loaded tooth contact area and loaded transmission error curves had only little changes under the installation errors, which indicated that the two directions modification of pinion cutter can reduce the sensitivity of tooth surface meshing performance to the installation errors.

Geometric Parameters of Extended Epicycloid Gear Tooth Surface Generated on Free-Form Bevel Gear Milling Machines

An adaptive geometric meshing theory for the face-milled generated spiral bevel gears

A new closed-form calculation of envelope surface for modeling face gears

Tooth Profile Generation and Analysis of Crowned Elliptical Gears

Geometric parameter design and contact characteristics of beveloid gear and involute cylindrical gear transmission with crossed axes

Geometric design and analysis of face-gear drive with involute helical pinion

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

Study on an Algorithm for Rebuilding Tooth Surfaces of Planar Double-Enveloping Toroid Worm Gear

A modeling and tooth contact analysis method of parabolic modified face gear

Parametric design of straight bevel gears based on a new tooth contact analysis model

Computerized Investigation of Real Tooth Contact Analysis of Face-milled Spiral Bevel Gears

Tooth surface mismatch design of cycloidal bevel gear based on two directions modification of pinion cutter

A comparative analysis of the geometrical surface texture of a real and virtual model of a tooth flank of a cylindrical gear

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear

Parametric modeling and contact analysis of helical gears with modifications

An advanced CAD/CAE integration method for the generative design of face gears

A Generalized Algorithm and Simulation Verification of Non-circular Gear Tooth Surface Data Points

Surface Geometry of Straight and Spiral Bevel Gears

Active tooth surface design of cycloid hypoid gears

Research on the Discrete Algorithm of Tooth Surface for a Curve-Face Gear

Investigation on the Dynamic Characteristics of Non-Orthogonal Helical Face Gears with Higher-Order Tooth Surface Modification