Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Axial Elastic-plastic Dynamic Buckling of Ring-Stiffened Cylindrical Shells

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

Elastic-plastic dynamic stability analysis of single layer spherical latticed shells considering damage accumulation effect

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Buckling of ring-stiffened cylindrical shell under axial compression: Experiment and numerical simulation

Buckling Critical Load Calculation and Analysis of Axially Impacted Cylindrical Shells Embedded in Elastic Media

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Dynamic Buckling of a Cylindrical Shell with a General Boundary Condition under an Axial Impact

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Quasi-static Numerical Simulation of Elephant-foot Buckling of Cylindrical Liquid Storage Tanks

Finite Element Analysis of Elastic-Plastic Buckling for Axisymmetric Shells

A semi-analytical analysis of strength and critical buckling behavior of underwater ring-stiffened cylindrical shells

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Analysis for Buckling of Finite Deformation on Moderately Thick Cylindrical Shells Subjected to Local Loads