Abstract:Using tetrabutyl titanate as the titanium source, and ammonia and ferric nitrate as the sources of nitrogen and ferrum respectively, iron and nitrogen-codoped nano-TiO2 gelatins were prepared by sol-gel method. The iron and nitrogen-codoped nano-TiO2 complex films were prepared with the obtained gelatins used to coat the surface of cleaned glass slides by several times of dipping-lifting procedure, followed by natural seasoning at room temperature and calcined at 450 degrees C for 3 hours, then the films were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectrum (XPS) and ultraviolet-visible diffuse reflectance spectrum (UV-Vis). The XRD spectra o f samples showed that the Fe-TiO(2-x)Nx, filmswere of anatase structure with a few of oxygen atoms in the lattice of anatase TiO2 substituted by nitrogen atoms, resulting in the distortion of crystal lattice. The SEM image showed that the nanoparticles of the films have a good dispersion characteristic and uniform orbicular shape with an average diameter of about 19 nm. The absorption edges of UV-Vis spectra exhibited a red shift up to 740 nm when the TiO2 films were codoped with iron and nitrogen. The XPS of the Fe-TiO(2-x)Nx film presented a lowering of Ti 2p(3/2) electron binding energy because of the codoping of iron and nitrogen, which then resulted in the widening of the absorption of visible light range. The photocatalytic properties were studied by photocatalytical degradation of sudan I as a model reaction in a self-assembled light-reactor. When the atomic ratio of Fe3+/Ti4+ reached 0.4%, the Fe-TiO(2-x)Nx film showed the highest catalytic performance in degradation of sudan I which was decomposed by up to 97% after 4 hours of photocatalytic reaction. Codoping of nitrogen and appropriate amount of iron in TiO2 enhances photoresponse and utilizing efficiency in visible light region, and then improves the performances of Fe-TiO(2-x)Nx photocatalyst. The complex film catalyst prepared by this method will have potential application in areas of wastewater disposal.

Iron-Doped Titania Nanoparticles for the Photocatalytic Oxidative Degradation of Nitrite

Characterization of Metal Doped-Titanium Dioxide and Behaviors on Photocatalytic Oxidation of Nitrogen Oxides

Preparation Of Fe3+-Doped Tio2 Nanoparticles And Their Photocatalytic Activities

Effect of ZnFe2O4 doping on the photocatalytic activity of TiO2

Marked Enhancement of Photocatalytic Activity and Photochemical Stability of N–doped TiO2 Nanocrystals by Fe3+/Fe2+ Surface Modification

PREPARATION OF IRON-DOPED TITANIA NANOCRYSTALLINE GRAINS AND ITS PHOTOCATALYTIC PROPERTY

[Preparation, spectral analysis and photocatalytic activities of TiO2 films codoped with iron and nitrogen]

Photonic, and Photocatalytic Behavior of Tio2 Mediated by Fe, Co, Ni, N Doping and Co-Doping

Iron-doped TiO2 nanotubes with high photocatalytic activity under visible light synthesized by an ultrasonic-assisted sol-hydrothermal method

Synthesis and Characterizations of Fe-Doped NiO Nanoparticles and Their Potential Photocatalytic Dye Degradation Activities

Heterogeneous Photocatalytic Reactions of Nitrite Oxidation on Iron-Doped Titania Prepared by Sol-Gel Method

Nitrogen-DopedTiO2Photocatalyst Prepared by Mechanochemical Method: Doping Mechanisms and Visible Photoactivity of Pollutant Degradation

Preparation of Ag-doped Titania Nanotube and Its Photocatalytic Degradation Performance for Nitrobenzene Wastewater

Transition-Metal Ion-Doped Flower-Like Titania Nanospheres As Nonlight-Driven Catalysts for Organic Dye Degradation with Enhanced Performances

Preparation and Photocatalytic Activity of Nanoparticle Fe/TiO2 by Chemical Precipitation Method

Gas-phase Photocatalytic Degradation of n-Hexane on Iron-doped Titania

Role of NiO Nanoparticles in Enhancing Structure Properties of TiO2 and Its Applications in Photodegradation and Hydrogen Evolution

Exploring the impact of Fe3+ ions on TiO2 nanostructures to enhance photocatalytic efficiency

Influences of various Pt dopants over surface platinized TiO2 on the photocatalytic oxidation of nitric oxide.

Fabrication of cadmium indium sulfide/cadmium sulfide/polyoxo-titanium cluster composite nanofibers with enhanced photocatalytic activity for nitrite degradation