Abstract:Cu-ZnO-Al2O3 is the most widely applied catalyst for CO2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al2O3 catalysts have been successfully demonstrated. By using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al2O3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h−1 kg−1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO2 dissociation.

Stabilization of Cu/ZnO Based Catalysts by Nickel Additive in Methanol Decomposition

Improvement of Cu/Zn-based catalysts by nickel additive in methanol decomposition

Mechanism of Cu/Zno Based Catalysis for Methanol Decomposition Promoted by Nickel

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

In-situ XPS study for reaction mechanism of methanol decomposition over Cu-Ni/Zn catalyst

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

In- situ XPS study for reaction mechanism of methanol decomposition over Cu-Ni/Zn catalyst

Effect of promoters on the performance of CuNi catalysts for hydrogen production from methanol decomposition

Performance of Cu-Mn-Zn/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: The effect of Zn content

Sodium Hydroxide–Sodium Oxalate-Assisted Co-Precipitation of Highly Active and Stable Cu/ZrO 2 Catalyst in the Partial Oxidation of Methanol to Hydrogen

Methanol Synthesis from CO2 Hydrogenation over CuZnCeTi Mixed Oxide Catalysts

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

CO2 Hydrogenation to Methanol over Partially Embedded Cu Within Zn-Al Oxide and the Effect of Indium

Development of highly stable catalyst for methanol synthesis from carbon dioxide

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst for enhanced CO2 -methanol conversion at low temperature and pressure

Dissecting ZnO X /Cu interfacial self-encapsulation and methanol-induced strong metal-support interaction of the highly active alloyed CuZn and ZnO for methanol steam reforming

Effect of ZnO incorporation on Cu–Ni/Al 2 O 3 catalyst for glycerol hydrogenolysis in the absence of added hydrogen

Impact of Preparation Methods on the Performance of Cu/Ni/Zr Catalysts for Methanol Decomposition

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol