Abstract:Some complex refrigeration and heat pump systems with several condensers and evaporators have been developed for different kinds of application. Traditional simulation models were developed for systems in certain operating modes and they failed in modeling the complex refrigeration systems with uncertainties of heat exchangers function and refrigerant flowing direction. In order to predict the performance of complex refrigeration systems, a simulation model is presented based on the two-phase fluid network. The model is consisted of distributed-parameter model of heat exchangers and connecting tubes, map-based model of inverter compressor and electronic expansion valve (EEV). Based on the characteristic of refrigeration system and fluid network, the three conservation equations, i.e. energy, momentum and mass equations, are solved iteratively. This model can deal with the uncertainty of refrigerant flow direction by separating the solving process of the components and the fluid network model, and therefore can simulate different kinds of complex refrigeration systems in different operating modes and conditions. The model is validated by the experimental data of an inverter air conditioner in heating/cooling operating modes and it shows the error of the model is mainly determined by the error of submodels of components in calculating heat transfer and pressure loss. The model is applied for performance analysis of three kinds of complex refrigeration systems in the accompanying article [Shi W.X., Shao, S.Q., Li, X.T., Yan, Q.S., 2008. Simulation model for complex heat pump systems based on two-phase fluid network: part II – model applications, International Journal of Refrigeration 31 (3), 500–509.].

Steady-State Distributed-Parameter Model Integrated with Artificial Neural Network for Condensers

Study on Fault Diagnosis of Condenser Based on BP Neural Network

A neural network model used in continuous grain dryer control system

A neural network based temperature control for air handling unit

Model-based Dimensionless Neural Networks for Fin-and-tube Condenser Performance Evaluation

INTEGRATED STEADY-STATE AND DYNAMIC SIMULATION OF MULTI-UNIT AIR CONDITIONERS BASED ON TWO-PHASE FLUID NETWORK MODEL

Modeling of Liquid Desiccant Cooling and Dehumidification System Based on Artificial Neural Network

System Modeling Research on Based on Neural Netwroks

A universal simulation model of air-cooled condenser consisting of plate-fin-tube

Fin-and-tube condenser performance modeling with neural network and response surface methodology

Dynamic Modeling of a Thermotechnical Object on the Basis of On-site Data and a Neural Network

Study on the simulation control of neural network algorithm in thermally coupled distillation

Modeling of a Condenser in Dynamic Operation Using Comsol Multiphysics Software

Simultaneous control of indoor air temperature and humidity for a chilled water based air conditioning system using neural networks

Modeling of Finned-Tube Evaporator Using Neural Network and Response Surface Methodology

Simulation of Fin-and-tube Heat Exchanger Based on Two-phase Fluid Network

Modeling and experimental study of air-cooled finned-tube condenser using coupled distribution parameter method and air-side temperature distribution

Applying artificial neural network to approximate and predict the transient dynamic behavior of CO 2 combined cooling and power cycle

Predicting Effects of Fin Parameters on Performance of Vehicular Intercooler Based on Neural Network Model

Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant condensation heat transfer inside herringbone-type Brazed Plate Heat Exchangers (BPHE)

Simulation model for complex refrigeration systems based on two-phase fluid network – Part I: Model development