Abstract:In this work an artificial neural network (ANN) is used to correlate experimentally determined and numerically computed Nusselt numbers and friction factors of three kinds of fin-and-tube heat exchangers having plain fins, slit fins and fins with longitudinal delta-winglet vortex generators with large tube-diameter and large the number of tube rows. First the experimental data for training the network was picked up from the database of nine samples with tube outside diameter of 18mm, number of tube rows of six, nine, twelve, and Reynolds number between 4000 and 10,000. The artificial neural network configuration under consideration has twelve inputs of geometrical parameters and two outputs of heat transfer Nusselt number and fluid flow friction factor. The commonly-implemented feed-forward back propagation algorithm was used to train the neural network and modify weights. Different networks with various numbers of hidden neurons and layers were assessed to find the best architecture for predicting heat transfer and flow friction. The deviation between the predictions and experimental data was less than 4%. Compared to correlations for prediction, the performance of the ANN-based prediction exhibits ANN superiority. Then the ANN training database was expanded to include experimental data and numerical data of other similar geometries by computational fluid dynamics (CFD) for turbulent and laminar cases with the Reynolds number of 1000–10,000. This in turn indicated the prediction has a good agreement with the combined database. The satisfactory results suggest that the developed ANN model is generalized to predict the turbulent or/and laminar heat transfer and fluid flow of such three kinds of heat exchangers with large tube-diameter and large number of tube rows. Also in this paper the weights and biases corresponding to the neural network architecture are provided so that future research can be carried out. It is recommended that ANNs might be used to predict the performances of thermal systems in engineering applications, especially to model heat exchangers for heat transfer analysis.

Model-based Dimensionless Neural Networks for Fin-and-tube Condenser Performance Evaluation

Fin-and-tube condenser performance modeling with neural network and response surface methodology

Modeling of Finned-Tube Evaporator Using Neural Network and Response Surface Methodology

A fast simulation model combining with artificial neural networks for fin-and-tube condenser

Performance Prediction for a Parallel Flow Condenser Based on Artificial Neural Network

Steady-State Distributed-Parameter Model Integrated with Artificial Neural Network for Condensers

General Simple Model for Adiabatic Capillary Tubes Based on the Identification of Average Specific Volume Using Artificial Neural Network

Performance Prediction Of Heat Exchangers Based On Model And Artificial Neural Network

Model-based Neural Network Method for Predicting Refrigeration Compressor Performance

Thermal Performance Estimation of Nanofluid-Filled Finned Absorber Tube Using Deep Convolutional Neural Network

Modeling of Liquid Desiccant Cooling and Dehumidification System Based on Artificial Neural Network

A neural network based temperature control for air handling unit

THERMODYNAMIC CALCULATION OF REFRIGERATION COMPRESSORS WITH MODIFIED ARTIFICIAL NEURAL NETWORK METHOD

Neural Networks Analysis of Thermal Characteristics on Plate-Fin Heat Exchangers with Limited Experimental Data

Predicting Effects of Fin Parameters on Performance of Vehicular Intercooler Based on Neural Network Model

Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant condensation heat transfer inside herringbone-type Brazed Plate Heat Exchangers (BPHE)

Modeling for Multi-Pass Parallel Flow Condenser with the Effect of Refrigerant Mal-Distribution

A dynamic model for predicting condensation heat and mass transfer characteristics in falling film condenser

Data-driven dryout prediction in helical-coiled once-through steam generator: A physics-informed approach leveraging the Buckingham Pi theorem

Performance Predictions of Laminar and Turbulent Heat Transfer and Fluid Flow of Heat Exchangers Having Large Tube-Diameter and Large Tube-Row by Artificial Neural Networks

Numerical Investigation of Condensation in Inclined Tube Air-Cooled Condensers