Abstract:In this work, the effect of using of dicumyl-peroxide (DCP) (2, 5 & 8 phr) and co-agent triallyl-cyanurate (TAC) (2, 4 & 6 phr) as cross-linking system as well as multi-walled carbon nanotubes (MWCNTs) (5, 8 και 10 phr) as a filler, for ethylene-propylene-diene terpolymer (EPDM) was investigated. Differential scanning calorimetry (DSC) was employed in order to study the progress of the cross-linking reaction, based on the exothermic vulcanization peaks of isothermal (at 160, 170, 180, 190 °C) and non-isothermal experiments (with heating rates 5, 10, 25, 50 °C min −1 ). The autocatalytic model was successfully applied to the results of isothermal experiments and the activation energy (E a ) of the reaction was calculated, based on the Arrhenius equation. The Ozawa-Kissinger equations were also applied to the data obtained from the non-isothermal study. From the results obtained from isothermal DSC experiments, an increase was observed in the reaction rates accompanied with a decrease in E a with the increase of DCP content, whereas a proportional relationship between TAC content and the enthalpy and E a of the reaction was recorded. The incorporation of MWCNT's in EPDM increased its E a . From the non-isothermal DSC experiments, a significant increase in the enthalpy and E a of the cross-linking reaction was observed at higher DCP content, whereas TAC content did not show any notable effect on the reaction. Based on the results of this research, it is concluded that the increase of peroxide content facilitates the vulcanization of EPDM, whereas inhibition was observed by the incorporation of MWCNT's.

Study on Rheological Properties of Reactive PP/EPDM Blends

The Rheological Behavior of Epoxy Resin and PA11 Blends

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends

Effects of Dynamic Crosslinking on Crystallization, Structure and Mechanical Property of Ethylene-Octene Elastomer/EPDM Blends

The Effect of Blending Ratios on Properties of EPDM/POE Blends

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Rheological Behavior and Nonisothermal Crystallization of Polypropylene/Epoxidized Natural Rubber Blends

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Influence of Radiation on Dynamic Rheological Behavior of PP,EPDM and Their Blends

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Reactive processing of PA6/EPDM‐MA blends as modifier for application and development of high‐performance polypropylene

The effect of cross-linking system and reinforcement on the cross-linking reaction of peroxide vulcanized ethylene-propylene-diene terpolymer (EPDM) matrix

Study on Chitosan Reinforced BR/EPDM Blends

Rheology Study on Polypropylene Blends with in situ Core-Shell Dispersed Particles

Influence of Crosslinking on Crystallization, Rheological, and Mechanical Behaviors of High Density Polyethylene/ethylene‐vinyl Acetate Copolymer Blends

Dynamic rheological behavior, crystallization and friction performance of ultrahigh molecular weight polyethylene/polypropylene blends by multi-step melt processing strategy

Effects of difunctional reactive polyhedral oligomeric silsesquioxane on the properties of EPDM

Influence of Epoxy Resin on the Morphological and Rheological Properties of PBT/ABS Blends Compatibilized by ASMA