Abstract:Objective. The purpose of this paper was to investigate the in vitro biodegradation of a guided tissue regeneration composite membrane, nano-carbonated hydroxyapatite/collagen/ poly(lactic - co- glycolic acid) (nCHAC/PLGA). Especially for periodontal therapy, the functional graded material (FGM) nCHAC/PLGA membrane was prepared that consisted of three layers with 8 wt% nCHAC + PLGA/4 wt% nCHAC + PLGA/PLGA, where one face of the membrane is porous, thereby allowing cell growth thereon and the opposite face of the membrane smooth, thereby inhibiting cell adhesion.Methods. For evaluation, in vitro degradation specimens of nCHAC/PLGA were immersed into artificial saliva solution at 37 degrees C for 1, 2, 4, 8 and 12 weeks to detect the weight loss over the period, and set pure PLGA membrane as control to compare the degraded behaviors. pH value and calcium concentration of the residual solution were measured, and morphology change was investigated by scanning electron microscopy (SEM).Results. During the experimental period in vitro, the whole shape of the membrane could be kept for 4 weeks, after that it became powder at between 8 and 12 weeks. The results demonstrated that weight loss increased continuously with a reduction in mass of 23.1% after 4 weeks and 88% after 12 week for the nCHAC/PLGA three FGM layers composite membrane. The calcium concentration in the residual solution showed a significant increase after 4 weeks, which referred to the nano-carbonated hydroxyapatite degradation. Moreover, the pH value in the solution of the nCHAC/PLGA membrane was a little higher than that of the pure PLGA membrane, which demonstrated the possible neutralization effect from nCHAC composite for the acid outcome of PLGA in the solution. The pore structure of 8 wt% nCHAC + PLGA was enlarged on the porous surface, while the nonporous surface of pure PLGA also showed a small porous structure after increased time.Significance. Degradation of the composite membrane is appropriate for practical periodontal repair. Moreover, the new mineral formation on the surface of the composite membrane referred to the possible positive effect in vivo for new bone tissue regeneration. (C) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

[The Degradation Performance of Bioabsorbable Acylchitin Fiber Reinforced PLA Composite Materials in Vitro and in Vivo].

Mechanical Properties and Degradation Properties in Vitro of Carbon Fiber Reinforced Hydroxyapatite/polylactide Composite

The Degradation Performance of Chitin Short Fiber Reinforced Polycaprolactone Composite in Vitro

Preparation and mechanical properties of carbon fiber reinforced hydroxyapatite/polylactide biocomposites

[Preliminary Evaluation of the Biological Properties of Poly-Lactide-co-glycolic Acid (PLGA) Knitted Mesh].

In Vitro Degradation and Biocompatibility of Poly(L-Lactic Acid)/Chitosan Fiber Composites

The Degradation Properties and Strength Retentions of Bioabsorbable, Solid-State Compression Reinforced Poly-L-lactide (SC-PLLA)

The Degradation of the Three Layered Nano-Carbonated Hydroxyapatite/collagen/plga Composite Membrane in Vitro.

Preparation and Biological Evaluations of PLA/chitosan Composite Materials

In Vitro Degradation Behavior of L-Lactide/Trimethylene Carbonate/Glycolide Terpolymers and A Composite with Poly(L-Lactide-Co-Glycolide) Fibers

In vitro and in vivo degradation behavior of n-HA/PCL-Pluronic-PCL polyurethane composites

Enzyme-catalyzed Degradation Behavior of L-Lactide/trimethylene Carbonate/glycolide Terpolymers and Their Composites with Poly(l-Lactide-co-glycolide) Fibers

A comparative study on the in vivo degradation of poly(L-lactide) based composite implants for bone fracture fixation

A strategy for controlling degradation in vitro of carbon fiber-reinforced polylactic acid composites (by combining fiber modification and pulsed electromagnetic fields)

Properties and structure variations of degradable fiber/calcium phosphate cement composite under similar physiological conditions

In vitro degradation of self‐reinforced poly(lactic acid) with beta‐tricalcium phosphate composite prepared by equal channel angular pressing

A comparison of the structure, thermal properties, and biodegradability of polycaprolactone/chitosan and acrylic acid grafted polycaprolactone/chitosan

Mechanical Properties of Polylactic Acid/Chitosan Composites by Fused Deposition Modeling

Preparation And Characterization Of Chitin Fiber Reinforced Pcl Composite

Characterization and Performance of Additive Manufactured Novel bio-waste Polylactic acid eco-friendly Composites

The Mechanical Properties and Degradation Behavior of 3D-Printed Cellulose Nanofiber/Polylactic Acid Composites