Abstract:The performance of the new generation aero-engine is strongly dependent on the application of integral blisk technologies, while the high-risk failure of integral disk joints severely restricts the promotion of those technologies. Therefore, the molecular dynamics method is used to investigate the influence of nanopores on the tensile properties of single crystal/polycrystalline Ni composites. The results show that the addition of single crystal nickel can increase the tensile strength of single crystal/polycrystalline Ni compared with polycrystalline nickel. The influence of pore position distribution on the tensile properties of single crystal/polycrystalline Ni is investigated. The simulation results show that nanopore defects in a single crystal region significantly aggravate the fracture at the single crystal/polycrystalline Ni interface. Pores not only penetrate the interface of composites but also rapidly expand inside the single crystal and the polycrystalline crystal, in which the interface of composites is further reduced resulting in the failure acceleration of single crystal/polycrystalline Ni composites. On the contrary, when the pores are in a polycrystalline region, the interface of single crystal/polycrystalline Ni hinders the amorphization of the polycrystalline nickel side and inhibits the pores from spreading toward the interface. When the pores are in the interface region, the pores do not continue to expand into the single crystal, but propagate inside the polycrystalline crystal. The effect of the porosity of interface pores on the tensile properties of single crystal/polycrystalline Ni is also discussed. It is found that the tensile strength of single crystal/polycrystalline Ni decreases rapidly when the void porosity exceeds 0.8%. Finally, the influence of the number of voids on the tensile properties while maintaining the porosity of the interface pores is analyzed. When the porosity of the prefabricated pores of the interface is kept constant at 0.8%, the larger the number of pores (i.e., the smaller the pores), the larger the elastic modulus. In the plastic deformation stage, due to the large number of dispersed small pore structures at the interface of the single crystal/polycrystalline Ni composites, the dislocation motion is hindered, which plays a certain strengthening role and improves the tensile strength of the single crystal/polycrystalline Ni composites. It can be concluded that single crystal/polycrystalline Ni with dispersed small pores has better tensile properties than those with large pores.

Effect Of Porosity On The Effective Magnetostriction Of Polycrystals

Influence of Microstructural Features on the Effective Magnetostriction of Composite Materials

Effective magnetostriction of nanocrystalline magnetic materials: An alternative effective-medium description of interfacial effect

Micromechanics Approach for Effective Magnetostriction of Composite Materials

Exact Connections Between Effective Magnetostriction and Effective Elastic Moduli of Fibrous Composites and Polycrystals

Unified Approach for the Estimate of Effective Magnetostriction of Composites and Polycrystals with Particulate and Columnar Microstructures

Effects of Microstructure on the Temperature Dependence of Relative Initial Permeability of NiCuZn Ferrites

Large and sensitive magnetostriction in ferromagnetic composites with nanodispersive precipitates

Effect of Nanopores on Tensile Properties of Single Crystal/Polycrystalline Nickel Composites

Theoretical Approach to Effective Electrostriction in Inhomogeneous Materials

Effective Magnetostriction of Magnetostrictive Composites

Giant heterogeneous magnetostriction induced by charge accumulation-mediated nanoinclusion formation in dual-phase nanostructured systems

Origin of heterogeneous magnetostriction: A case study of nanoprecipitates-bearing Fe-Mo alloys

Effects of porosity on the measured fracture energy of brittle materials

Magnetoelectricity of Multiferroic Composites

Compaction and Sintering Effects on Scaling Law of Permeability-Porosity Relation of Powder Materials

Influence of porosity on anisotropic thermal conductivity of SiC fiber reinforced SiC matrix composite: A microscopic modeling study

Textured, Dense and Giant Magnetostrictive Alloy from Fissile Polycrystal

Phase field modeling of the effect of porosity on grain growth kinetics in polycrystalline ceramics

Rate Dependent Rheological Stress-Strain Behavior of Porous Nanocrystalline Materials

Effect of Microstructure on Magnetization Processes of La0.7Sr0.3MnO3 Perovskite