Abstract:High Co-Ni secondary hardening steels have received great attention for a long time. In several decades, many previous studies were made to improve their strength, toughness, corrosion resistance ability and even stress corrosion sensibility. Although many new kinds of high Co- Ni secondary hardening steels were developed by researchers, the mechanisms of strength and toughness were still a problem, which would inhibit the further development of high Co-Ni secondary hardening steels. In this work, both microstructure and mechanical properties of high Co-Ni secondary hardening steels were analyzed by simulation and experiment. The strengthening and toughening mechanism was explained, which included the transformation induced plasticity (TRIP) effect of austenite layer in nanometer size and the precipitation of M2C in nanometer size. According to the previous studies about AerMet100 steel, the design standard for high Co-Ni secondary hardening steels was established, which included the mole volume change for austenite, the stability of austenite, the austenite thickness, the austenite equilibrium content, the M2C size, the M2C equilibrium content and cost control. Based on this design standard, the ageing process for a new high Co-Ni secondary hardening steel was analyzed. By controlling the ageing process as 515 degrees C for 10 h, based on the design standard, M2C with the size of 1-5 nm and austenite layers with the thickness of 10-20 nm was formed in new high Co-Ni secondary hardening steels. The equilibrium content of M2C and austenite layers were controlled as 19.5% and 3.8%, respectively. The simulation results were basically consistent with the microstructure observation results. The high Co-Ni secondary hardening steel treated by the designed heat treatment process has considerable strength (2021 MPa) and toughness (115 MPa center dot m(1/2)). Both simulation and experimental results showed that this design standard of ageing process for high Co-Ni secondary hardening steels can help to obtain steels with high strength and toughness.

ALLOY DESIGN OF COBALT-FREE SECONDARY HARDENING ULTRA-HIGH STRENGTH STEEL

Alloy design and properties optimization of multi-component alloy based on solidification characteristics

Effects of Co on Mechanical Properties and Precipitates in a Novel Secondary-Hardening Steel with Duplex Strengthening of M2C and β-NiAl

Design Standard and Analysis of Ageing Process in High Co-Ni Secondary Hardening Steel

Design of a nickel-base superalloy using a neural network

Design of a 2.7 GPa ultra-high-strength high Co–Ni secondary hardening steel by two-step nano-size precipitation tailoring

Chemical Component Optimization Based on Thermodynamic Calculation of Fe-1.93Mn-0.07Ni-1.96Cr-0.35Mo Ultra-High Strength Steel

The cobalt-free Fe35Mn15Cr15Ni25Al10 high-entropy alloy with multiscale particles for excellent strength-ductility synergy

COMPUTATIONAL DESIGN OF UHS STAINLESS STEEL STRENGTHENED BY MULTI-SPECIES NANOPRECIPITATES COMBINING GENETIC ALGORITHMS AND THERMOKINETICS

A Novel Ultrafine-Grained High Entropy Alloy with Excellent Combination of Mechanical and Soft Magnetic Properties

An intelligent design for Ni-based superalloy based on machine learning and multi-objective optimization

Precipitation-hardened High Entropy Alloys with Excellent Tensile Properties

Machine-learning assisted design of as-cast NiCoFeCrAlTi multi-principal element alloys with tensile yield strength over 1.35 GPa

Carbide Precipitation and Element Distribution in High Co–Ni Secondary Hardening Steel

Machine learning assisted design of γ′-strengthened Co-base superalloys with multi-performance optimization

Coupling high-throughput experiment and machine learning to optimize elemental composition in nickel-based superalloys

Microstructure, mechanical properties and corrosion resistance of an as-cast fine-structured Cr-Fe-Ni-Al-Si high entropy alloy

Genetic alloy design based on thermodynamics and kinetics

Design of NiCoCrAl eutectic high entropy alloys by combining machine learning with CALPHAD method

Auto-tempering-induced nanoprecipitate strengthening of ultrastrong low-alloy high-carbon steel