Abstract:The mechanical properties of quench-tempered high-strength low-alloy steels are commonly optimized by fine and dispersively distributed alloy carbides. The role of the alloying elements in determining the alloy carbide precipitation sequence is of great significance. The co-addition of carbide-forming elements such as Mo, V and Nb complicates the precipitation behavior. The mutual inter-solutions and growth rates of various MC- and/or M2C-type carbides are qualitatively affected by the intrinsic solubility and diffusion at certain tempering condition. However, comprehensive study of the precipitation sequence must be followed with atomic scale resolution techniques. The 3D atom probe (3DAP) is a unique tool capable of obtaining chemical information at the atomic level, offering a powerful method to investigate microstructural and compositional changes occurring at nano-scale. And the sizes, morphology and composition of individual alloy carbide may be visualized and quantified by 3DAP. In this paper, a quenched Nb-V microalloyed steel was chosen to investigate the precipitation behavior of alloy carbide after tempering at 450-650 V for different times. 3DAP, micro-hardness test and TEM were applied to characterize the phenomena of hardening and softening during tempering, and the composition evolution and growth behaviors of the alloyed carbides were also studied. The results indicated the second hardening of the 500-600 degrees C tempering martensite is mainly resulting from precipitation strengthening of alloy carbides. The alloy carbides composition dynamically changed with elevated temperature or prolonged time, that is, the stronger carbide-forming elements replaced or partly replaced the weaker ones. At first V and Nb replaced Mo, and then Nb partly replaced V, and at last the carbides with certain composition were formed. Tempering time has relatively less effect on the carbides composition compared with temperature. When the tempering temperature elevated or tempering time prolonged, the alloying elements can obtain adequate diffusion energy and/or time, the plate-like carbides preferentially grow along the radial direction, and then grow along the thickness direction and start to coarsen.

Microstructural characterization of VC precipitates in a low alloy Cr-Mo-V steel

MICROSTRUCTURE OF AS-MELT SPUN Al-Cu-Mg-Fe-Ni ALLOY AND ITS VARIATION IN CONTINUOUS HEAT TREATMENT

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Compositional and structural characterization of alloyed carbide by 3D atom probe and high-resolution TEM

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Microstructure Evolution of V-containing Low Carbon Ultra-Fine Bainitic Steel During Medium-Temperature Tempering and Strengthening-Toughening Mechanism

Influence of tempering time on precipitates in Nb-V micro-alloyed steel

Effect of fine precipitates on initiation and propagation of micro-cracks in low alloy Cr-Mo-V steel

Fluctuations of properties of Cr-Mo-V hot work die steels by artificial increment of vanadium

A study of microstructure and performance of tempered Fe-V-W-Mo alloy

Thermomechanical Control of Microstructure and Precipitation in Vanadium Microalloyed Steel: Influence of Finish Rolling and Coiling Temperatures

3D ATOM PROBE CHARACTERAZATION OF ALLOY CARBIDES IN TEMPERING MARTENITE III. Coarsening

3D Atom Probe Characterazation of Alloy Carbides in Tempering Martenite Ii. Growth

Combination of TEM and 3D Atom Probe Study of Microstructure and Alloy Carbide in a Nb-V Micro-Alloyed Steel Tempered at 650 °C

Quantitative Analysis on Carbide Precipitation in V-Ti Microalloyed TRIP Steel Containing Aluminum

Strengthening of Low Carbon Steel by Nano-sized Vanadium Carbide in Ferrite and Tempered Martensite

Influence of Mo on Tempering Precipitation in Nb-Mo-V Microalloyed Steels

Effect of Tempering on Microstructure Evolution and Mechanical Properties of X12CrMoWVNbN10-1-1 Steel

INVESTIGATION ON THE PRECIPITATES IN TEMPERING V-Nb MICRO-ALLOYED STEEL BY THREE DIMENSIONAL ATOM PROBE

Microstructure Evolution and Micro-Mechanical Behavior of Secondary Carbides at Grain Boundary in a Fe–Cr–W–Mo–V–C Alloy

Investigating Microstructural Evolution and Its Influence on Tribological Behaviors of In-Situ Formed VCp Reinforced Iron-Based Composites with Variable Mn Content