Abstract:This paper proposes a transformer-coupled series DC active power filter (DCAPF) applied to high performance magnet power supplies with large current and low ripples. In the condition of heavy magnet loads, this type of DCAPF has much better filtering performance compared with the parallel DCAPF. Firstly, the configuration of the magnet power supplies with the series DCAPF is proposed. Then a novel control strategy for the DCAPF, i.e. detecting the ripple voltage across the R-C branch filter as the reference signal of the DCAPF, is presented and analyzed in detail. After that, the most important component in the whole power system, the coupling transformer, is described in particular. The difference between it and ordinary transformers is introduced. Furthermore, the main steps of designing the coupling transformer are sketched out. With the novel control approach and the coupling transformer, a set of laboratory prototype of 5 kVA high performance magnet power supply system was developed. Simulation and experimental studies have been carried out. For 600 Hz components, the ripple voltage decreases to 1.14 V, only 6.52% of the value without the DCAPF. It is nearly the same case with other ripple components. The results verify the high performance of the transformer-coupled series DCAPF.

Active Power Filter with Optimal DC Side Condenser

Approaches to Shunt Active Power Filter for Application with Capacitive Nonlinear Load

The AC Side Output Filter Design of Shunt Active Power Filter

Voltage Ripple Across the Capacitor in DC Side of Shunt APF

A New Hybrid Active Power Filter Topology with Continuous Compensation Bandwidth and Small Active Capacity

A three-phase four-wire three-level active power filter based on one-cycle control

Analysis Algorithm for Calculating THD in Shunt Active Power Filter

Transformer-coupling series DC active power filter

Phase to Phase Balance Compensation Control Arithmetic of Active Power Filter

A Novel Active Damping Method for LCL-filter-based Shunt Active Power Filter

A DC-link Voltage Balancing Strategy Based on Controllable Neutral Current Injected for T-type Three-Level Active Power Filter

A Charging Current Ripple Suppression Strategy for Three-phase Power Conversion System Based on DC-side Harmonic Current Compensation

An Improved Harmonic Detection Based On Lead Compensation For Active Power Filter

Optimum design consideration and implementation of a parallel hybrid active power filter integrated into a three-phase capacitive diode rectifier

A Novel Current Detection Algorithm for Shunt Active Power Filters in Harmonic Elimination, Reactive Power Compensation and Three-Phase Balancing

System Integrated Active Power Filter For Three-Phase Rectifier Application

New Control Scheme for Series DC Active Power Filters Coupled by Transformers Applied to High Performance Magnet Power Supplies

A New-Style Shunt Active Power Filter Based on DC Capacitor Voltage Control and Compensation Current Feedback Control

Design and Implementation of a Three-Level Active Power Filter for Harmonic and Reactive Power Compensation

Status quo of active power filter technology

Study on the Three-Phase Four-Legs Active Filter Based on One-Cycle Control