Abstract:New complex-shaped and thin-walled carbon/carbon (C/C) composites have become the main hot structural material for new hypersonic vehicles because of their superior properties. In the preparation of complex-shaped and thin-walled C/C composites by chemical vapor infiltration (CVI) method, problems such as slow density growth and inhomogeneity of density distribution have been hindering the development of C/C hot structure, in order to solve which, this paper proposes a design method for domain-limited CVI reactors for complex-shaped and thin-walled C/C structure, as well as conducts CVI experiments with the designed domain-limited reactor for a L-shaped and thin-walled C/C structure. A coupled multi-physical field model considering flow, diffusion, and chemical reactions was established, which was verified by comparison with experiments. The effects of diameter of hole, distance of neighboring holes, depth of hole and length of reactor on deposition quality were analyzed by simulation. The results showed that larger diameter of hole and smaller distance of neighboring holes would be more favorable for the accumulation of density of structure and depth of hole has little effect on deposition. The best solution is diameter of hole with 18 mm and distance of neighboring holes with 20 mm. Homogeneity of density can be improved by adjusting the specific length of the reactor. For the fabric sizes given in the study, when the specific length of the preform is 3.4, the deposition rate and homogeneity can reach a good level at the same time. This study is a guideline for optimization the quality of C/C structure during processing.

Numerical simulation of thermal-gradient CVI process for C/C composite

T-S Fuzzy System for Isothermal CVI Process of C/C Composites

Processing of C<i><sub>f</sub></i>/SiC Composites through Two-Channel Temperature-Control CVI: I, Modeling

Numerical simulation of effects of reactor dimensions on isothermal CVI process of C/SiC composites

Modeling for the Fabrication Process of a φ1185 mm C/C Composite Thermal Insulation Tube in an Isothermal Chemical Vapor Infiltration Reactor

Modeling of isothermal CVI process of C/C composites by fuzzy neural network

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Design of domain-limited CVI reactor for L-shaped C/C structure

Modeling of Forced Flow-thermal Gradient CVI: Effects of Control Parameters and Processing Schemes on a Densification

Modeling The Effects Of Reactor Inlet Configuration On Isothermal Cvi Process Of C/Sic Composites

FUZZY SYSTEM MODEL FOR ISOTHERMAL CHEMICAL VAPOR INFILTRATION PROCESS OF CARBON/CARBON COMPOSITES

Probabilistic physics-integrated neural differentiable modeling for isothermal chemical vapor infiltration process

Numerical mapping relationship between process parameters and mechanical properties of unidirectional carbon/carbon composites

The Numerical Simulation Research of Internal Curing Process for Fiber Winding Composite Shell

Numerical Simulation for the Investment Casting Process of a Large-Size Titanium Alloy Thin-Wall Casing

Numerical evaluation of effective elastic properties of CVI-C/C composites considering anisotropic matrix

Research Progress in Numerical Simulation of Fiber Reinforced Thermosetting Resin Matrix Composites Molding Process

Thermal Performance Analysis of Carbon Materials Based TSV in Three Dimensional Integrated Circuits

Numerical Simulation of Vertical Centrifugal Casting Process for Complex Ti Alloy Casting

Hot-zone design of carbon/carbon-metal sandwich structure composite using cvi/cvd material processing

Multi-scale Modeling of Thermal Expansion Coefficients of C/C Composites at High Temperature