Abstract:The surface morphology of viscoelastic-sensitive films significantly affects sensing characteristics of surface acoustic wave (SAW) sensors. Uniformity and compactness of the film surface directly influences detectability of the SAW sensor toward target gases. Viscoelastic fluoroalcoholpolysiloxane (SXFA) was prepared in this work using spin coating technology on an SAW delay line of 200 MHz and then used as coating for detection of dimethyl methylphosphonate (DMMP). Polarizing, atomic force, and scanning electron microscopies confirmed the uniformity of the SXFA surface. The particle diameter in the cluster region was 10-15 μm. The contact angle (5.72-26.69°), surface tension (21.053-29.155 mN/m), Gibbs free energy (-160.68 to -153.45 J/m2), and spreading coefficient (0.3028-6.9453 J/m2) of different concentrations of SXFA were obtained through experiments, and their relation was analyzed using the Young T equation and Gibbs adsorption isotherm. The glass transition temperature (-19.7 °C) and elasticity of SXFA were also discussed. The consistency of sensor preparation was confirmed by detecting DMMP with five SAW sensors prepared simultaneously. Seven consecutive tests showed that the SAW sensor presents satisfactory repeatability (standard deviation, s, 1.134; coefficient of variance, v, 0.065; and population mean deviation, δ, 0.913) at a concentration of 1.71 mg/m3 and acceptable linear relationship at a concentration range of 0.058-1.92 mg/m3, with a sensitivity of around 1.21 mv/(mg/m3). The sensor exhibited outstanding sensitivity and satisfactory linearity and repeatability to DMMP. Meanwhile, the sensing mechanism in gas adsorption was also discussed in terms of LSER formulation and hydrogen bonding formation between SXFA and DMMP.

Thin Film of Surface Acoustic Wave Sensor for Sulfur Dioxide Gas

Polymer Film Coated Micro/Nanofiber for Gas Sensing

Au Thin-Film Electrodes Based Potentiometric CO 2 Sensor Using Li 3 PO 4 As Both the Reference Material and the Solid Electrolyte

Gas sensing properties of layer-by-layer self-assembled ultrathin film of polyaniline/titanium dioxide

Sensitive Materials Used in Surface Acoustic Wave Gas Sensors for Detecting Sulfur-Containing Compounds

Experimental Study on SAW SO2 Sensor Based on Carbon Nanotube-polyanilin Films

Fabrication and design of a toxic gas sensor based on polyaniline/titanium dioxide nanocomposite film by layer-by-layer self-assembly

Fabrication and Characterization of Polyaniline-Based Gas Sensor by Ultra-Thin Film Technology

Gas Sensing Properties of Surface Acoustic Wave Nh3 Gas Sensor Based on Pt Doped Polypyrrole Sensitive Film

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

P-CuO/n-TiO 2 heterojunction nanostructure-based surface acoustic wave sensor with strong electric loading effect for highly sensitive H 2 S gas sensing

Polyaniline/CuO Nanoparticle Composites for Use in Selective H 2 S Sensors

P-CuO/n-TiO2 heterojunction nanostructure-based surface acoustic wave sensor with strong electric loading effect for highly sensitive H2S gas sensing

Sorption and Diffusion of Water Vapor and Carbon Dioxide in Sulfonated Polyaniline as Chemical Sensing Materials

Interface and Sensitive Characteristics of the Viscoelastic Film Used in a Surface Acoustic Wave Gas Sensor

SAW gas sensor with proper tetrasulphonated phthalocyanine film

Comparison of response towards NO2 and H2S of PPy and PPy/TiO2 as SAW sensitive films

Design of the Novel Polyaniline/polysiloxane Flexible Nanocomposite Film and Its Application in Gas Sensor

Preparation and Characterization of Polyaniline/indium(iii) Oxide (pani/in 2 O 3 ) Nanocomposite Thin Film

A Study on the Gas/Humidity Sensitivity of the High-Frequency SAW CO Gas Sensor Based on Noble-Metal-Modified Metal Oxide Film

QCM gas sensor of polyaniline indium(IIl) oxide composite thin films