Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Study of Active Nucleation Site Density in Subcooled Nucleate Pool Boiling

CFD Simulations and Experimental Verification on Nucleate Pool Boiling of Liquid Nitrogen

Prediction of active site density near critical heat flux of cryogenic liquid

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Nucleation site interaction during boiling

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

NEW MODEL FOR POOL NUCLEATE BOILING HEAT TRANSFER

Nonlinear Aspects of Boiling Systems and A New Method for Predicting the Pool Nucleate Boiling Heat Transfer

Assessment of Nucleation Boiling Models and Improvement by the Chen Correlation for Two-fluid Model CFD

Numerical Study on Bubble Behaviour and Heat Transfer Characteristics of Subcooled Pool Boiling Based on Non-Empirical Boiling and Condensation Model

Development of A Boiling and Condensation Model on Subcooled Boiling Phenomena

Regulated Transient Pool Boiling of Water During Quenching on Nanostructured Surfaces with Modified Wettability from Superhydrophilic to Superhydrophobic

Numerical Prediction for Subcooled Boiling Flow of Liquid Nitrogen in a Vertical Tube with MUSIG Model

Modeling and numerical investigation of hydrogen nucleate flow boiling heat transfer

An improved wall boiling model for numerical simulation of subcooled flow boiling on a new hybrid micro/nanostructured surface

Experimental Study of Contact Angle and Active Nuleation Site Distribution on Nanostructure Modified Copper Surface in Pool Boiling Heat Transfer Enhancement

Effects of heterogeneous nucleation model on computational fluid dynamics simulation of flow boiling heat transfer in the mini-channel

Study on Local Sub-Cooling Boiling in the Vertical Upward Pipe

Heat Transfer Characteristics and Chf Prediction in Nanofluid Boiling

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Numerical investigation on boiling flow of liquid nitrogen in a vertical tube using bubble number density approach