Abstract:In non‐contact voltage measurements on low‐voltage three‐phase power lines, the coupling capacitances between neighboring lines, as well as spaced lines and sensors, are not negligible. This leads to an increase in the number of unknown capacitances. The number of associable response voltage equations is less than the number of unknown coupling capacitances. This paper proposes a simplified decoupling method for non‐contact voltage measurement based on the erection characteristics of triangular three‐phase lines in distribution areas. Firstly, establish the equivalent circuit of voltage sensing mechanism measurement during three‐phase operation, and derive the three‐phase line response voltage equation. Secondly, this paper proposes a three‐phase line response voltage decoupling algorithm after designing the decoupling matrix. The three‐phase coupling equation is decoupled into three independent equations. This paper then uses the least squares method to solve the coefficients in the equation. Finally, the three‐phase voltage fluctuation in the actual low‐voltage station area is simulated by simulation. The measured sensor voltage values are substituted into the algorithm to invert and calculate the three‐phase line voltage. The three‐phase phase error is less than 2°? The amplitude error is less than 1.77%. This experiment verifies the robustness and accuracy of the proposed inversion method. This in turn proves the practicality of the three‐phase simplified decoupling method in this paper. The coupling capacitance between the line and the transducer cannot be ignored when making non‐contact voltage measurements on low‐voltage three‐phase power lines. This leads to an increase in the number of unknown capacitances, and the number of correlatable response voltage equations is less than the number of unknown coupling capacitances. In this paper, a simplified decoupling method is proposed based on the characteristics of triangular three‐phase lines erected in distribution areas. Firstly, the equivalent circuit measured by the voltage sensing mechanism during three‐phase operation is established, and the three‐phase line response voltage equation is derived. Secondly, this paper proposes a three‐phase line response voltage decoupling algorithm after designing the decoupling matrix. Then, this paper uses the least squares method to solve the coefficients in the equations. Finally, the three‐phase voltage fluctuations of the actual low‐voltage stations are simulated by simulation. The measured sensor voltage values are substituted into the algorithm to invert and calculate the three‐phase line voltage. The three‐phase phase error is less than 2°. The amplitude error is less than 1.77%. The experiment verifies the stability and accuracy of the proposed decoupling method.

DETERMINATION FOR A MATRIX OF ELECTRIC COUPLING COEFFICIENTS IN THREE-PHASE VFT VOLTAGE MEASUREMENT

VFT PHASE VOLTAGE MEASUREMENT IN THREE-PHASE ENCLOSED GIS

Phase Voltage Measurement on Very Fast Transients in Non-Symmetrical Three-Phase Enclosed Gas Insulated Substation

APPARATUS FOR PHASE VOLTAGE MEASUREMENT IN THREE-PHASE ENCLOSED GIS ON VERY FAST TRANSIENTS

TRANSIENT PARAMETERS AND NUMERICAL CALCULATION MODEL ON VFT IN THREE-PHASE ENCLOSED GIS

Research on Coordinate Transformation of the Three-Phase Circuit

Gas–oil two-phase flow measurement using an electrical capacitance tomography system and a Venturi meter

Simplified decoupling simulation study of non‐contact voltage measurement in distribution station area

Measuring method for phase current of symmetrical three-core power cable based on magnetic sensors

New Algorithm for State Estimation Based on Fast Decoupling of Distribution System's Asymmetrical Three-phase in Phase Coordinates

Mechanical Structure for fast Voltage Coefficients Determination of Compressed-gas Capacitor with Tilting Technic

Design of Capacitance Sensor System for Void Fraction Measurement

A Sensor for 3-D Component Measurement of Synthetic Electric Field Vector in HVDC Transmission Lines Using Unidirectional Motion

Non-Contact Measurement Method of Phase Current Based on Magnetic Field Decoupling Calculation for Three-Phase Four-Core Cable

Study on a New Power Frequency Capacitive Voltage Transducer for Gas Insulated Substations Based on Capacitive Voltage Division

A Novel Capacitance Determination Method of Metal Oxide Arrester Blocks when Excited by VFTO

An analytical method for calculating the surface magnetic field for three-core electrical power cables

Simulation Analysis of Capacitance Method in Two-Phase Flow Concentration Measurement by Coupled Fields

Voidage Measurement of Oil-Gas Two-Phase Flow Using Electrical Capacitance Tomography Technique

Generalized Coordinates Transformation Theory of Multiphase System

Test and Simulation Analysis on the Electric Field Distribution Characteristics of UHVAC Composite Cross-arm Fittings