Abstract:Reducing Mg particles to nanoscale and doping with various catalysts are considered as efficient approaches for improving the hydrogen storage properties of Mg/MgH2. It has been established that doping Ni or Mg2Ni into nano-Mg/MgH2 through physical routes remarkably improves the hydrogen sorption kinetics. In this work, a Mg-Ni nanocomposite has been coprecipitated from a tetrahydrofuran (THF) solution containing anhydrous magnesium chloride (MgCl2), nickel chloride (NiCl2), and lithium naphthalide (LiNp) as the reducing agent. TEM observations reveal that Ni nanoparticles are distributed homogeneously on the surface of those larger Mg particles with sizes ranging from 10 to 20 nm in the nanocomposite. It is observed that gamma-MgH2 phase appears when the nanocomposite is hydrogenated at temperatures below 225 degrees C. Pressure-composition-temperature (PCT) measurements reveal that the Mg-Ni nanocomposite has superior hydrogen storage properties over the pure Mg prepared using the same method. For instance, the Mg-Ni nanocomposite can absorb 85% of its maximum hydrogen capacity within 45 s at 125 degrees C, and a hydrogen capacity of 5.6 wt % can be obtained within 10 h at room temperature. In addition, the dehydrogenation temperature of the hydrogenated Mg-Ni nanocomposite is also much lower than that of the hydrogenated pure Mg. The hydrogenation and dehydrogenation enthalpies of the Mg-Ni nanocomposite are determined to be -70.0 and 70.7 kJ/mol H-2, slightly lower than those for the reduced pure Mg. The excellent hydrogen sorption properties of the Mg-Ni nanocomposite can be attributed to the nanosize effect of Mg particles and the gateway effect of Mg2Ni formed in the composite after hydrogenation/dehydrogenation cycles.

The Influence of Magnesium Content on the Hydrogen Absorption Properties of MmNi5-x(CoAlMn)x/Mg Nanocrystalline Composite

The Effect of Mg Content on Microstructure and Hydrogen Absorption Properties of Mechanical Alloyed MmNi3.5(CoAlMn)1.5–Mg

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

The effects of Co and Ni addition on the hydrogen storage properties of Mg3Mm

Effects of the Amount of Mg Impurity on the Electrochemical Properties of Ml(NiCoMnTi)5 Hydrogen Storage Alloy

Effect of Mn And Zr on Hydrogen Absorption in Mg-Based Nanocomposites

Microstructure and Hydrogen Absorption Properties of Nano-Phase Composite Prepared by Mechanical Alloying of MmNi5−x(CoAlMn)x and Mg

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

Composite structure and hydrogen storage properties in Mg-base alloys

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Hydrogen Absorption/desorption Properties of Li–Al–N–H Composite

Effect Of Mg On The Hydrogen Storage Characteristics Of M1(1-X)Mg(X)Ni(2.4)Co(0.6) (X=0-0.6) Alloys

Effect of Nanostructure and Partial Substitution on Gas Absorption and Electrochemical Properties in Mg2Ni-based Alloys

Study on hydrogen storage properties of Mg–X (X = Fe, Co, V) nano-composites co-precipitated from solution

Influence of Mn Content on the Structural and Electrochemical Properties of the La0.7Mg0.3Ni4.25−xCo0.75Mnx Hydrogen Storage Alloys

Catalytic effect of (Ti0.85Zr0.15)1.05Mn1.2Cr0.6V0.1Cu0.1 on hydrogen storage properties of ultrafine magnesium particles

Hydrogen Storage Properties of a Mg–Ni Nanocomposite Coprecipitated from Solution

Mechanical alloying induced solid state reaction and formation of nano-phase composite hydrogen storage alloys in MmNi5-x(Co, Al, Mn)x/Mg system

Hydrogen Storage Properties of Mg100−xNix (x = 5, 11.3, 20, 25) Composites Prepared by Hydriding Combustion Synthesis Followed by Mechanical Milling (HCS + MM)

Study on Hydrogen Storage Properties of LaNi3.8Al1.2−xMnx Alloys