Abstract:This paper presents finite element (FE) modeling of the debonding behavior of fiber reinforced polymer (FRP)-to-concrete interfaces subject to mixed-mode loading, which is realized through a peeling test of FRP composites externally bonded onto a concrete substrate. A cohesive zone model (CZM) is implemented into the FE model to represent the behavior of the FRP-to-concrete interface. Two element schemes (orthotropic plane stress element and beam element) were employed to simulate the behavior of FRP composite plate in the peeling test. The orthotropic plane stress element scheme, bearing a clear physical background and with an easy definition of the material property parameters following the composite mechanics, is found to be superior to the beam element scheme, and thus is utilized to conduct parametric studies. The influences of the peeling angle, the interfacial parameters (i.e., the configuration of the cohesive zone models, the interfacial damage initiation law (DIL), the interfacial damage evolution law (DEL), the coupling of mode-I and mode-II components), on the mixed-mode failure of the FRP-concrete-interface are carefully investigated. The results showed that the mode I component plays a critical role in the debonding failure of FRP-to-concrete interfaces even when the peeling angle is very small. The failure of FRP-to-concrete interface transits promptly from a mode II-dominated one to a mode I-dominated one when the peeling angle increases to a relatively small value (e.g., 4 degree) and subsequently the peeling force (i.e., the debonding strength of FRP) decreases dramatically. Such mixity of the mode I and mode II components should be appropriately considered for refining the analysis of FRP-strengthened RC beams and the FRP debonding strength design, for which a pure mode II interfacial failure was usually assumed.

Interfacial Debonding of Coated-Fiber-reinforced Composites under Tension-Tension Cyclic Loading

A Multiscale Interfacial Cyclic Debonding Model for Fibre-Reinforced Composites Using Micromechanics and Molecular Dynamics

Dynamic Tensile Behavior of Fiber Reinforced Materials Based on Fiber Layering Modeling

Properties of Frictional Bridging in Fiber Pull-out for Fiber-Reinforced Composites

Debonding mechanisms in the presence of an interphase in composites

A cohesive zone model incorporating a Coulomb friction law for fiber-reinforced composites

Interfacial fatigue limit as measure of cyclic bonding strength of hard coatings

A cohesive zone model for the elevated temperature interfacial debonding and frictional sliding behavior

Interface Debonding Criteria in SiC Fiber-Reinforced Composites

Characterization of Interfacial Bonding Property of Carbon Fiber/epoxy Resin Using Single Fiber Fragmentation Test with Dual Matrix Composites

Prediction of Interfacial Debonding in Fiber‐Reinforced Composite Laminates

Interfacial debonding analysis in multiple fiber reinforced composites

A frictional cohesive zone model for characterizing transverse compression responses of unidirectional fiber-reinforced polymer composites

Damage Failure Mechanism of Unidirectional Fiber Reinforced SiCf/SiC Composites under Uniaxial Tension

Measurement of Tensile and Shear Strength of Interfacial Bonding in Fiber Reinforced Soft Composites Combining Experiments and Simulation

Finite Element Modeling for Debonding of FRP-to-Concrete Interfaces Subjected to Mixed-Mode Loading

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

An insight into the mechanical behavior and failure mechanisms of T-stiffened composite structures with through-interface debonding defects

Finite Element Analysis of Interfacial Debonding Damage in Fiber-Reinforced Ceramic Matrix Composites

Microscopic Failure Mechanisms of Fiber-Reinforced Polymer Composites under Transverse Tension and Compression

A Framework for Phase-Field Modeling of Interfacial Debonding and Frictional Slipping in Heterogeneous Composites