Abstract:Plastic deformation of low/high density polyethylene (LDPE/HDPE) was analyzed in this work using positron annihilation lifetime spectroscopy (PALS). It was shown that in undeformed LDPE, both the mean ortho-positronium lifetime (τ3) and its dispersion (σ3), corresponding to the average size and size distribution of the free-volume pores of the amorphous component, respectively, were clearly higher than in HDPE. This effect was induced by a lower and less uniform molecular packing of the amorphous regions in LDPE. During the deformation of LDPE, an increase in the τ3 value was observed within the local strains of 0–0.25. This effect was mainly stimulated by a positive relative increase in interlamellar distances due to the deformation of lamellar crystals oriented perpendicular (increased by 31.8%) and parallel (decreased by 10.1%) to the deformation directions. At the same time, the dimension of free-volume pores became more uniform, which was manifested by a decrease in the σ3 value. No significant effect of temperature or strain rate on the τ3 and σ3 values was observed during LDPE deformation. In turn, in the case of HDPE, with an increase in the strain rate/or a decrease in temperature, an intensification of the cavitation phenomenon could be observed with a simultaneous decrease in the τ3 value. This effect was caused by the lack of annihilation of ortho-positonium (o-Ps) along the longer axis of the highly anisotropic/ellipsoidal cavities. Therefore, this dimension was not detectable by the PALS technique. At the same time, the increase in the dimension of the shorter axis of the cavities was effectively limited by the thickness of amorphous layers. As the strain rate increased or the temperature decreased, the σ3 value during HDPE deformation increased. This change was correlated with the initiation and intensification of the cavitation phenomenon. Based on the mechanical response of samples with a similar yield stress, it was also proven that the susceptibility of the amorphous regions of LDPE to the formation of cavities is lower than in the case of amorphous component of HDPE.

Investigation of free volume properties in segmented copolymer PET/PEO by positron annihilation

Free Volume Characteristics Of 2,2-Bistrifluoromethyl-4,5-Difluoro-1,3-Dioxole-Co-Tetrafluoroethylene Copolymers: Effect Of Composition And Molecular Weight

Effects of Physical Aging on Thermomechanical Behaviors of Poly(ethylene Terephthalate)-Glycol (PETG)

Optimizing Physical Aging in Poly(ethylene Terephthalate)-Glycol (PETG)

A Monte Carlo Study Of The Glass Transition Of Polymethylene

Free Volume Changes in Gamma-Irradiated Polyethylene and Polytetraflourethylene

Free volume changes in γ-irradiated polyethylene and polytetraflourethylene

Studies on Microdomain Structure in Segmented Polyether Polyurethaneureas by Positron Annihilation Lifetime and Small—angle X—ray Scattering

Temperature Memory Effect and Its Stability Revealed Via Differential Scanning Calorimetry in Ethylene‐vinyl Acetate Within Glass Transition Range

Molecular-level investigation of plasticization of polyethylene terephthalate (PET) in supercritical carbon dioxide via molecular dynamics simulation

Morphology And Molecular Motion Of Poly(Ethylene Terephthalate) In Polymer/Oligomer Gel

Study of Segmented Ethylene Terephthalate–caprolactone Copolymer by Differential Refractometry and Light Scattering

Intermediate states in the melting process of low molecular weight poly(ethylene oxide)

Investigation Of Microstructure And Conductive Mechanism Of High Density Polyethylene/Carbon Black Particle Composite By Positron Annihilation Lifetime Spectroscopy

A Modified Light-Scattering Method for the Characterization of the Segmented Copolymer Poly(Ethylene Terephthalate-Co-Caprolactone)

Strain Rate and Temperature Influence on Micromechanisms of Plastic Deformation of Polyethylenes Investigated by Positron Annihilation Lifetime Spectroscopy

On the Nature of Multiple Melting in Poly(Ethylene Terephthalate) (pet) and Its Copolymers with Cyclohexylene Dimethylene Terephthalate (Pet/ct)

DMA Investigation of the Factors Influencing the Glass Transition in 3D Printed Specimens of Shape Memory Recycled PET

Molecular Weight Distribution of a Segmented Copolymer of PET–PCL

Effect of the electric field on the free volume investigated from positron annihilation lifetime and dielectric properties of sulfonated PVC/PMMA

Influence of UV-Irradiation on Latent Tracks in Polyethylene Terephthalate Films