Abstract:The aim of this study is to examine cracking and instability of the high and steep left bank slope with weak rock mass structures, and effectiveness of the reinforcements designed for the slope at the Jinping hydroelectricity power station, southwestern China. A new geomechanical model testing method is first proposed for evaluating slope safety factors. In the proposed geomechanical model test, the slope is constructed on a flat testing bed, which can be rotated by hydraulic lifts. By increasing the rotation angle of the testing bed, the forces tending to induce the sliding of the slope are increased, which may cause crack initiation and propagation in the slope and result in rock mass slippage. Thus, through the proposed geomechanical model test, the slope failure mechanism, progressive failure process and final failure pattern can be studied. Moreover, the stability safety factors can be evaluated according to displacement data monitored by sensors installed in the geomechanical model. The geomechanical model test of the Jinping left-bank slope reveals that the bending and toppling cracks occur simultaneously in the unreinforced zone of the slope together with strong relaxation and tension cracks. It is found that the factor controlling the rock mass failure and instability is the structurally weak rock mass and the dominant failure mode is the integral catastrophic instability mode, in which the slope energy is totally dissipated and the slope destabilizes at a limit state. The reinforcement installed in the large area above the elevation of the dam-slope abutment and the unloading action due to the excavation of rocks lying above the dam platform have effectively improved the anti-slide safety factor of the slope, and thus increased its inherent safety factor. On the basis of the geomechanical model testing results and their comparisons with field monitoring results, it is concluded that the installed rock bolts and long anchor reinforcement measures are very effective in keeping the cracks closed in the rock mass and maintaining the slope stability.

Rheological Damage Study Of Highslope At The Three Gorges Shiplock And Comparison With In-Situ Measured Data

Rheologic damage study of Three Gorges Shiplock highslope and analysis on in-situ measured deformation

Testing Study of Subcritical Grack Growth of Graniteat the Three Gorges Shiplock

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Back analysis on the Three Gorges Project shiplock slope and evaluation to stability and safety

Laboratory Simulation of Flow Through Rough-Walled Microfractures under High Hydraulic Gradient

Study On Deformation Character Of Three Gorges Project'S 2nd Phase Cofferdam During Its Operation Period

Time-dependent virtual crack model of rock with application to slope stability

Damage evolution of hydraulically coupled Jianchuandong dangerous rock mass

Degradation of Typical Reverse Sand-Mudstone Interbedded Bank Slope Based on Multi-Source Field Experiments

Damage evolution and stability analysis of the Jianchuandong Dangerous Rock Mass in the Three Gorges Reservoir Area

STABILITY ANALYSIS ON THE HIGH SLOPES OF THREE-GORGES SHIPLOCK USING FLAC-3D

Investigation on the dynamic cumulative damage mechanism and stability of bedding rock slope under the deterioration of rock mass in the hydro-fluctuation belt

Safety Evaluation & Predication For The Permanent Ship Lock Of Three Gorges Project By P-S Back Analysis

Seepage-stress combined experiment and damage model of rock in different loading and unloading paths

Stability and Propagation of Cracks at the Heel of High Arch Dams

Application of 3-D Elastoplastic Damage Model with Bolts to a Large Sized Rockmass Slope Engineering

Seepage Analysis of Orthogonal Shear Cracks in Granite Based on Fractal Theory

Simulation on Back Analysis of Shuanghe Arch Dam Cracking

Cracking, stability and slope reinforcement analysis relating to the Jinping dam based on a geomechanical model test

Study on Mechanism of Crack on Upstream Surface of Super-High Arch Dam