Reliability evaluation method of a water supply pipe network subjected to earthquake action

Hongwei Zhang,Haixin Wu,DaJun Sun,Wei Y. Huang,Hong Kang

1999-01-01

Abstract:In this paper, a reliability analysis method for a water supply pipe system is presented. By calculating a sample using self-program computer software, the reliability and the practicability of the method are proved.

What problem does this paper attempt to address?

Method and Application of Seismic Reliability Assessment for Urban Water Supply Pipeline

Lu Yiting,Jiang Jianqun,Hu Yunjin,Yang Chao

DOI: https://doi.org/10.3969/j.issn.1009-7716.2012.06.049

2012-01-01

Abstract:Aiming at the seismic destroying mechanism of urban water supply pipeline,the article introduces the commonly used experience assessment method and the theoretically analyzing assessment method.Using the theoretical computation model according to the current seismic design code for the pipeline in China and the thought of the first-order second-moment method of structural reliability analysis,the article considers the randomness of the pipeline resistance,filed condition and the pipe-soil interaction,and presents the computation process of checking point method of seismic reliability assessment of urban water supply pipeline.The article analyzes the sensitivity of parameters in the computation process and determines the importance of parameters,and finally compares the empirical method of Japan Water Works Association(JWWA),proves the feasibility of the method,and puts forward the proposal for the standard theoretical computation method.
Seismic Damage Assessment of Urban Water Supply Pipeline

Jiang Jian Qun,Yao Xiao Wen,Lu Yi Ting

DOI: https://doi.org/10.4028/www.scientific.net/amm.316-317.723

2013-01-01

Applied Mechanics and Materials

Abstract:Water supply pipeline system is a key issue in urban lifeline engineering, and the seismic assessment for the system damage is of significant importance. In this study, method of seismic damage assessment on underground water supply pipeline is introduced. With emphasis on the uncertainties of earthquake level, ground condition, soil-pipe interaction and capacity to resist pipe deformation in longitudinal direction, the check point method is applied to the reliability study of water pipeline, and a case study is presented to show the implementation of the proposed model.
Review on Reliability Analysis Methods for Water Distribution System

WU Xiao-gang,ZHANG Tu-qiao

DOI: https://doi.org/10.3969/j.issn.1007-4929.2006.04.013

2006-01-01

Abstract:Because of the complexity of water distribution system and influence of many factors,the reliability analysis methods for water distribution system developed slowly.At present,there is no one commonly accepted method that has been adopted in the practical design.From the aspects of general classification,considering system capacity and valve configuration,various existing methods were reviewed in this paper,which had some reference value for design and repair of water distribution system.
Comparison and Application of Seismic Damage Assessment Method in Urban Water Supply Pipeline

Yang Chao,Jiang Jianqun

DOI: https://doi.org/10.16799/j.cnki.csdqyfh.2011.03.020

2011-01-01

Abstract:The urban water supply pipeline network is the important component of the urban lifeline engineering. The article mainly introduces some methods of seismic damage assessment on underground water supply pipeline, including the common theoretical analysis method and the empirical assessment method, compares and analyzes the characters of these methods and their applicability. A newly built town underground water supply pipeline in an earthquake area is assessed by the empirical assessment method of Japan Watercourse Association.
Effect of the Valve Setting to the Reliability of the Water Supply Pipelines Net

WU Xiao-gang,ZHANG Tu-qiao,WANG Zhi-min,HUANG Ya-dong

DOI: https://doi.org/10.3969/j.issn.1005-0329.2006.04.012

2006-01-01

Abstract:A kind of new model using valve and segment of water distribution system is proposed.This method may be used in the basic reliability analysis,which has some reference value for the practical repair.
Technologies For Risk Evaluation And Decision-Making Of The Failure In Municipal Water Distribution System

Wu Xiao-Gang,Zhang Tu-qiao,Wu Zhong-hua

DOI: https://doi.org/10.1109/ICCA.2007.4376448

2007-01-01

Abstract:This paper focuses on a minimum cut-set methodology for reliability evaluation of municipal water distribution systems. Based on the application of minimum cut-set methodology in complex municipal water distribution networks, a calculation model for risk evaluation and decision-making of hydraulic accident in water distribution systems is presented in this paper. A case is conducted to demonstrate the methodology with a program compiled by author. The result obtained shows that minimum cut-set methodology for risk evaluation and decision-making of hydraulic accident is scientific, reasonable, effective and valuable for application.
Reliability Analysis and Studies on Water Tunnel Based on Fault Tree Analysis Method

Kang-wu ZHU,Wei-zheng CHEN,Jian-xing LENG

DOI: https://doi.org/10.3969/j.issn.1672-5468.2007.06.013

2007-01-01

Abstract:The reliability analysis of the blow-down water tunnel is accomplishe.Firstly,the fault tree of the blow-down water tunnel is obtained based upon the structure analysis of the system.Secondly,the fault tree is qualitatively analyzed by using the least cut set method and all possible failure modes of the system are got.Thirdly,the reliability and the importance indexes of the bottom events of the control system are calculated.At last,the methods to calculate the reliability of the system and the importance indexes of the bottom events are obtained,and the faults in the one order least cut set are the weakest ones of the system.And then,several suggestions are presented for improving the reliability of the system.
Numerical Analysis of Buried Pipe Characteristics

Zhang Tu-qiao,Shao Wei-yun

DOI: https://doi.org/10.1007/bf02839231

2000-01-01

Journal of Zhejiang University SCIENCE A

Abstract:Voluminous statistical data on the breakage and leakage of pipelines occurring frequently in water supply and drainage engineering, were collected and analyzed to find the causes and solutions for the breakage and leakage. Then the original parameter method of foundation beam on elastic semi-infinite plane subgrade was applied to verify the statistical results. Numerical computational results showed that the performance of the original parameter method of foundation beam was satisfactory.
Technology of Risk Evaluation and Decision-Making for Fault Risk of Water Supply Net System

WU Xiao-gang,Tuqiao Zhang

2006-01-01

Abstract:The method of minimalcutset is the effective way to evaluate the reliability and the risk of the network system.Based on the application of the mininalcutset way in the complex water supply net system,this paper established the calculating model of the risk evaluation and the decision-making for the fault of the water supply net system,and analyzed the corresponding example through the program compiled by authors.The results show that the analysis method on the risk evaluation and the decision-making of the urban supply water pipelines based on the theory of minimalcutset was scientific,reasonable, effective,and valuable for application.
Two-dimensional Pipe Leakage Through a Line Crack in Water Distribution Systems

Shuai Guo,Tu-qiao Zhang,Wei-yun Shao,David Z. Zhu,Yuan-yu Duan

DOI: https://doi.org/10.1631/jzus.a1200227

2013-01-01

Journal of Zhejiang University SCIENCE A

Abstract:In water distribution systems,water leakage from cracked water pipes is a major concern for water providers.Generally,the relationship between the leakage rate and the water pressure can be modeled by a power function developed from the orifice equation.This paper presents an approximate solution for the computation of the steady-state leakage rate through a longitudinal line crack of a water distribution pipe considering the surrounding soil properties.The derived solution agrees well with results of numerical simulations.Compared with the traditional models,the new solution allows assessment of all the parameters that related with leakage including the pressure head inside the pipe,hydraulic conductivity,crack size and its position,and pipe size and its depth.
Pipe burst hydraulic model of water distribution system and pipe burst location

程伟平,赵丹丹,许刚,蒋建群

DOI: https://doi.org/10.3785/j.issn.1008-973X.2013.06.018

2013-01-01

Abstract:A pipe burst hydraulic model of water distribution system was developed which involved the pressure dependent demand model and the information from supervisory control and data acquisition system (SCADA) aiming at the problems including the pipe burst detection and location. The model utilizes the minimum head error to estimate the water loss at the bursting point. This model was applied to analyze a real pipe burst event at a certain city. The loss estimation agreed with the on-the-spot investigation well. Meanwhile the water distribution system state was solved both before and after the burst event, and the result showed that 2/3 area was affected by the pipe bursting event. The monitored result from SCADA showed that the differential pressure increased around the bursting point, and it decreased at the reverse direction of the bursting point. The results demonstrate that the change of the monitored differential pressure or the hydraulic gradient is vital for identifying the burst location.
Seismic reliability analysis of water distribution networks on the basis of the probability density evolution method

Huiquan Miao,Wei Liu,Jie Li

DOI: https://doi.org/10.1016/j.strusafe.2020.101960

IF: 5.712

2020-09-01

Structural Safety

Abstract:<p>In this study, a new approach for assessing the seismic functional reliability of water distribution networks is presented on the basis of the probability density evolution method. The original contribution of this paper is to build a new framework for the reliability analysis of water distribution networks on the basis of the physical mechanism of water distribution networks subjected to earthquakes. Firstly, a finite element model is established to capture the seismic response of the entire buried pipe networks. Then the nodal head of water distribution networks is derived through hydraulic analysis of water distribution networks with leakages. Secondly, owing to the randomness of ground motions, the probability density functions of the nodal heads of water distribution networks are obtained on the basis of the probability density evolution method. Thirdly, the seismic functional reliability of water distribution networks is evaluated considering the demand heads of nodes. When the nodal head is larger than the predetermined water head, the node is reliable while when the nodal head is smaller than the predetermined water head, the node is not reliable. Two examples, namely, a virtual and an actual water distribution networks, are examined in detail to investigate the feasibility of the proposed method. Results show that the proposed method effectively evaluates the seismic functional reliability of water distribution networks.</p>

engineering, civil
Reliability evaluation method for pipes buried in fault areas based on the probabilistic fault displacement hazard analysis

Qian Zheng,Xiaoben Liu,Hong Zhang,Xiaoting Gu,Maoli Fang,Liang Wang,Samer Adeeb

DOI: https://doi.org/10.1016/j.jngse.2020.103698

IF: 5.285

2021-01-01

Journal of Natural Gas Science and Engineering

Abstract:<p>The tectonic fault poses a great threat to buried pipe segments. Buckling or rupture of pipes will ensue due to large strain induced by continuously increasing fault movements. In this study, a reliability-based methodology is conceptually proposed for designing new buried pipes or assessing existing pipes installed in fault areas. Uncertainties associated with the influencing factors of pipe structure and seismic loading (fault displacement) generated by earthquakes are considered. For pipe structural reliability, a developed back-propagation neural network (BPNN)-based surrogate model is utilized for the strain demand term in the limit state function for reliability calculations. Given statistical data for the basic variables including diameter, wall thickness, internal pressure, intersection angle or dip angle, and soil spring resistances, the conditional probability of failure can be obtained at a particular fault displacement by Monte Carlo simulation. Uncertainty of the fault displacement is estimated based on probabilistic fault displacement hazard analysis (PFDHA) having results given as probability of exceeding a certain fault displacement level for a specific site, then the occurrence probability of a specific fault displacement at a specific time can be indirectly obtained. The actual probability of failure (PoF) is calculated as an integral of fault displacement based on the total probability which is the product of the conditional PoF of pipe structure and occurrence probability of the specific fault displacement. This developed methodology is applied to a case study about a pipe project from China. Results show that the probability of failure increases with the elapsed time but stay within the safety margin for the next 30 years. Generally, the result of PFDHA is an essential input parameter in reliability analysis for pipes buried in fault regions. The multidisciplinary combination of structural reliability analysis and fault displacement hazard analysis is of practical significance for the reliability-based study of pipes in fault regions.</p>

energy & fuels,engineering, chemical
Reliability sensitivity analysis for water hammer-induced stress failure of fluid-conveying pipe

Congyi Zha,Chenrong Pan,Zhili Sun,Qin Liu

DOI: https://doi.org/10.1016/j.apm.2024.02.028

IF: 5.336

2024-03-07

Applied Mathematical Modelling

Abstract:The water hammer, resulting from sudden valve closures or similar operations, is a primary cause of leakage and damage in fluid-conveying pipe systems. This work aims to investigate the reliability sensitivity of fluid-conveying pipes under the water hammer. A reliability model for the fluid-conveying straight pipe, involving uncertainty and fluid-structure interaction, is developed based on the stress-strength interference theory. Then the method of characteristics is employed to analyze the nonlinear behaviors of the pipe. To avoid excessive model evaluations, the Kriging surrogate strategy is used to evaluate rapidly the statistics of nonlinear responses. Furthermore, the Kriging model coupled with the single-loop Monte Carlo simulation is presented for estimating reliability sensitivity indices. The accuracy of results is verified by the Monte Carlo simulation. The results reveal that the proposed method is feasible for the reliability sensitivity analysis of fluid-conveying pipe under the water hammer. Moreover, the wall thickness has the most obvious influence on stress failure, followed by the inner radius, while the pipe length, Young's modulus, density of the pipe material, and Poisson ratio show a low effect. This work can not only guide the safety design of pipe but also enrich the theory and application of statistical analysis and reliability sensitivity evaluation for liquid-conveying pipe systems.

mechanics,engineering, multidisciplinary,mathematics, interdisciplinary applications
RELIABILITY-BASED ON THE PRESSURE TEST EVALUATION APPROACH FOR RE-USED SUBMARINE PIPELINE SYSTEM

李骏嵘,邵剑文,金伟良,孙文波

DOI: https://doi.org/10.3969/j.issn.1001-4500.2004.04.002

2004-01-01

Abstract:A new evaluation approach for safety and reliability of re-used submarine pipeline is presented by pressure of submarine pipeline.The approach is efficient and practical to evaluate safety and reliability of old submarine pipeline with lower cost and shorter time.
Model on Reliability of Earthquake-damaged Water System with Effects of Electric Power Availability

Yiting Zheng,Guofeng Su,Jianguo Chen,Hongyong Yuan

DOI: https://doi.org/10.3969/j.issn.1000-811X.2015.03.037

2015-01-01

Abstract:Urban lifeline systems,such as water,electrical power,natural gas,and transportation systems, have interactions,once one infrastructure system is damaged by an earthquake or other natural hazards,other sys-tems may malfunction as well.Based on graph theory and Monte Carlo,we establish a model to access the reliabili-ty of water supply pipeline network,considering the influence of electric power and give an engineering example an-alyzed by computer program of Matlab.The result of a practical example shows that the power supply to water sup-ply network service rate has a greater degree of influence.
Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

naiyu wang,mehdi s zarghamee

DOI: https://doi.org/10.1061/(ASCE)PS.1949-1204.0000148

IF: 1.916

2014-01-01

Journal of Pipeline Systems Engineering and Practice

Abstract:This paper presents a methodology for evaluating fitness-for-service (i.e., safety, serviceability, and reliability) of corroded metal pipelines. A model for predicting pipe failure pressure is developed from a series of nonlinear finite-element analyses of metal pipes of different diameters and wall thicknesses with corrosion defects of different sizes and depths. The strength limit state (burst) and service limit states (yield and leakage) both are investigated in the pipe fitness-for-service analyses. Uncertainties associated with in situ measurement of flaw size, pipe geometry, pipe material properties, operating pressures, and corrosion in exposure environments are considered in a time-dependent reliability analysis of pipe performance over a service life of 50 years. Engineering variables that have the most significant impact on the reliability of a corroded pipe are identified through Monte Carlo-based sensitivity studies. Finally, a set of simple reliability-based evaluation tools are presented for assessing pipeline safety. The procedure and the results presented in this paper can be used to support decisions related to continued safe operation of pipes, optimal pipe inspection intervals, and maintenance schedules. (C) 2013 American Society of Civil Engineers.
Functionality Analysis of an Urban Water Supply Network after Strong Earthquakes

Jichao Li,Qingxue Shang,Guanjie Hou,Quanwang Li,Tao Wang

DOI: https://doi.org/10.1007/s11803-021-2020-0

IF: 2.8

2021-01-01

Earthquake Engineering and Engineering Vibration

Abstract:An urban water supply network (WSN) is a crucial lifeline system that helps to maintain the normal functioning of modern society. However, the hydraulic analysis of a significantly damaged WSN that suffers from pipe breaks or leaks remains challenging. In this paper, a probability-based framework is proposed to assess the functionality of WSNs in the aftermath of powerful earthquakes. The serviceability of the WSN is quantified by using a comprehensive index that considers nodal water flow and nodal pressure. This index includes a coefficient that reflects the relative importance of these two parameters. The demand reduction (DR) method, which reduces the water flow of nodes while preventing the negative pressure of nodes, is proposed. The difference between the negative pressure elimination (NPE) method and the DR method is discussed by using the example of a WSN in a medium-sized city in China. The functionality values of the WSN are 0.76 and 0.99 when nodal pressure and nodal demands are used respectively as the index of system serviceability at an intensity level that would pertain to an earthquake considered to occur at a maximum level. When the intensity of ground motion is as high as 0.4 g, the DR method requires fewer samples than the NPE method to obtain accurate results. The NPE method eliminates most of the pipes, which may be unrealistic.
Seismic resilience evaluation of water distribution systems considering hydraulic and water quality performance

Benwei Hou,Jinmei Huang,Huiquan Miao,Xudong Zhao,Shan Wu

DOI: https://doi.org/10.1016/j.ijdrr.2023.103756

IF: 4.842

2023-05-21

International Journal of Disaster Risk Reduction

Abstract:The resilience evaluation of infrastructures provides an essential basis for resilience enhancement and disaster mitigation in urban communities. This study presents a seismic resilience evaluation framework of water distribution systems (WDSs) that integrates hydraulic with water quality simulation. The seismic damage scenarios of WDSs are generated according to the seismic fragility model of pipelines and Monte Carlo simulation, and the post-earthquake recovery of pipeline damages is simulated by a dynamic importance-based recovery sequence. The negative influence of earthquake hazards on water quality is investigated by the reduction of chlorine concentration in water, which depends on the changes in water age and supply path caused by pipeline damages. The water quality performance of WDSs is measured by the residual chlorine concentration at user nodes, and two water quality performance indexes, namely, the water supply that meets the quality threshold requirements and the water supply without quality deterioration after the earthquake. The proposed framework is implemented in three benchmark WDSs with different layouts and operational features. Application results show that the water quality resilience of WDSs tends to be lower than that of hydraulic services, and the relative difference in system resilience loss between the water quality and hydraulic service performance ranges from 17% to 286%, which varied according to the layout of WDSs. The water source redundancy, and not the loop pattern of the pipeline network, has crucial impacts on the water quality resilience of WDSs after an earthquake event.

geosciences, multidisciplinary,meteorology & atmospheric sciences,water resources
Reliability Analysis of Deep Excavation Based on Field Monitoring Data

ZHU Hong-hu,YE Xiao-wei,RAN Long

DOI: https://doi.org/10.3969/j.issn.1006-2106.2011.09.002

2011-01-01

Abstract:Research purposes: There are considerable uncertainties existing in deep excavation activities and the field monitoring data cannot directly reflect the present excavation stability condition in most cases.In this paper,combing Bayesian updating with Monte Carlo finite element method,real-time reliability assessment of stability during the excavation of Pengbu station of Hangzhou Metro is performed based on field measurement data. Research conclusions: The results show that,in comparison with conventional method,it is more rational to estimate the failure probability of deep excavation by use of field monitoring data.This method can effectively enhance the accuracy of excavation stability analysis and avoid the problems resulting from the errors of the inclinometer readings.The horizontal displacement monitoring data of the diaphragm wall can be used as the input information of reliability analysis.The selection of failure criteria has a significant influence on the stability analysis results.The proposed method can compensate for the limitations of conventional reliability analysis and is a promising alternative method for stability analysis of excavation based on field monitoring data.

Reliability evaluation method of a water supply pipe network subjected to earthquake action

Method and Application of Seismic Reliability Assessment for Urban Water Supply Pipeline

Seismic Damage Assessment of Urban Water Supply Pipeline

Review on Reliability Analysis Methods for Water Distribution System

Comparison and Application of Seismic Damage Assessment Method in Urban Water Supply Pipeline

Effect of the Valve Setting to the Reliability of the Water Supply Pipelines Net

Technologies For Risk Evaluation And Decision-Making Of The Failure In Municipal Water Distribution System

Reliability Analysis and Studies on Water Tunnel Based on Fault Tree Analysis Method

Numerical Analysis of Buried Pipe Characteristics

Technology of Risk Evaluation and Decision-Making for Fault Risk of Water Supply Net System

Two-dimensional Pipe Leakage Through a Line Crack in Water Distribution Systems

Pipe burst hydraulic model of water distribution system and pipe burst location

Seismic reliability analysis of water distribution networks on the basis of the probability density evolution method

Reliability evaluation method for pipes buried in fault areas based on the probabilistic fault displacement hazard analysis

Reliability sensitivity analysis for water hammer-induced stress failure of fluid-conveying pipe

RELIABILITY-BASED ON THE PRESSURE TEST EVALUATION APPROACH FOR RE-USED SUBMARINE PIPELINE SYSTEM

Model on Reliability of Earthquake-damaged Water System with Effects of Electric Power Availability

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Functionality Analysis of an Urban Water Supply Network after Strong Earthquakes

Seismic resilience evaluation of water distribution systems considering hydraulic and water quality performance

Reliability Analysis of Deep Excavation Based on Field Monitoring Data