Effect of the Valve Setting to the Reliability of the Water Supply Pipelines Net

WU Xiao-gang,ZHANG Tu-qiao,WANG Zhi-min,HUANG Ya-dong

DOI: https://doi.org/10.3969/j.issn.1005-0329.2006.04.012

2006-01-01

Abstract:A kind of new model using valve and segment of water distribution system is proposed.This method may be used in the basic reliability analysis,which has some reference value for the practical repair.

What problem does this paper attempt to address?

Review on Reliability Analysis Methods for Water Distribution System

WU Xiao-gang,ZHANG Tu-qiao

DOI: https://doi.org/10.3969/j.issn.1007-4929.2006.04.013

2006-01-01

Abstract:Because of the complexity of water distribution system and influence of many factors,the reliability analysis methods for water distribution system developed slowly.At present,there is no one commonly accepted method that has been adopted in the practical design.From the aspects of general classification,considering system capacity and valve configuration,various existing methods were reviewed in this paper,which had some reference value for design and repair of water distribution system.
Method and Application of Seismic Reliability Assessment for Urban Water Supply Pipeline

Lu Yiting,Jiang Jianqun,Hu Yunjin,Yang Chao

DOI: https://doi.org/10.3969/j.issn.1009-7716.2012.06.049

2012-01-01

Abstract:Aiming at the seismic destroying mechanism of urban water supply pipeline,the article introduces the commonly used experience assessment method and the theoretically analyzing assessment method.Using the theoretical computation model according to the current seismic design code for the pipeline in China and the thought of the first-order second-moment method of structural reliability analysis,the article considers the randomness of the pipeline resistance,filed condition and the pipe-soil interaction,and presents the computation process of checking point method of seismic reliability assessment of urban water supply pipeline.The article analyzes the sensitivity of parameters in the computation process and determines the importance of parameters,and finally compares the empirical method of Japan Water Works Association(JWWA),proves the feasibility of the method,and puts forward the proposal for the standard theoretical computation method.
Pipe burst hydraulic model of water distribution system and pipe burst location

程伟平,赵丹丹,许刚,蒋建群

DOI: https://doi.org/10.3785/j.issn.1008-973X.2013.06.018

2013-01-01

Abstract:A pipe burst hydraulic model of water distribution system was developed which involved the pressure dependent demand model and the information from supervisory control and data acquisition system (SCADA) aiming at the problems including the pipe burst detection and location. The model utilizes the minimum head error to estimate the water loss at the bursting point. This model was applied to analyze a real pipe burst event at a certain city. The loss estimation agreed with the on-the-spot investigation well. Meanwhile the water distribution system state was solved both before and after the burst event, and the result showed that 2/3 area was affected by the pipe bursting event. The monitored result from SCADA showed that the differential pressure increased around the bursting point, and it decreased at the reverse direction of the bursting point. The results demonstrate that the change of the monitored differential pressure or the hydraulic gradient is vital for identifying the burst location.
Technologies For Risk Evaluation And Decision-Making Of The Failure In Municipal Water Distribution System

Wu Xiao-Gang,Zhang Tu-qiao,Wu Zhong-hua

DOI: https://doi.org/10.1109/ICCA.2007.4376448

2007-01-01

Abstract:This paper focuses on a minimum cut-set methodology for reliability evaluation of municipal water distribution systems. Based on the application of minimum cut-set methodology in complex municipal water distribution networks, a calculation model for risk evaluation and decision-making of hydraulic accident in water distribution systems is presented in this paper. A case is conducted to demonstrate the methodology with a program compiled by author. The result obtained shows that minimum cut-set methodology for risk evaluation and decision-making of hydraulic accident is scientific, reasonable, effective and valuable for application.
Valve-Based Reliability Assessment for Water Distribution Systems

Chaohong Xiao,Baowei Li,Gang He,Jilong Sun,Si Li,Ronghe Wang

DOI: https://doi.org/10.1061/9780784413821.071

2014-01-01

Abstract:Valves play an important role in a water supply network, especially when a portion of the network needs to be isolated for repair or rehabilitation of broken components. To evaluate the valve-based reliability of a water distribution system, the concept of "segment" is proposed. When it is necessary to shut down during planned and unplanned maintenance, a segment - comprised of a cut set of pipes and nodes that is bounded by valves - is the minimum isolation unit. In this paper, the concept of reliability is defined as the ability of a network to adequately provide for the demands of consumers within specified limits of pressure. Finding the optimal strategy of valve shutdown and assessing the reliability of the water distribution system are two main issues which this paper addresses. A segment and outage segment generation technology will be used to divide the entire system into multiple segments, which contains a portion of pipes and nodes. According to the given general statistics information on the segment, we can find an appropriate shutdown scheme and assess the reliability of the system. At the end of this paper, a case study is presented in which a Chinese city pipe network is analyzed and assessed, and an optimization scheme is proposed.
A Study of Dynamic Characteristics of Valve Control Hydr Aulic System with Long Pipeline

孔晓武,邱敏秀,魏建华,吴根茂

DOI: https://doi.org/10.3321/j.issn:1004-132x.2002.13.020

2002-01-01

Abstract:An accurate mathematical model of valve control hydraulic system is established through theoretical analysis. The influence of long pipeline on valve control hydraulic system is investigated by theoretical analysis and simulation and a series of conclusions are obtained, which is important to the design and analysis of valve control hydraulic system.
Improvement of the Segment‐valve Model for Solving the Valve Isolation Problem and Evaluating the Reliability of Water Distribution Networks

Zhen Hu,Haiming Jiao,Qingfeng Guan,Wen Zeng,Zhijiang Yang,Yang Zhou,Feng Xu

DOI: https://doi.org/10.1029/2022wr033717

IF: 5.4

2023-05-27

Water Resources Research

Abstract:The segment‐valve graph model is widely used in the reliable evaluation of water distribution networks. However, as an undirected graph, a segment‐valve graph does not express the upstream‐downstream relationships between segments, which hinders finding valves that need to be closed when a pipe bursts and the water outage region. Therefore, in this paper, directed edges applied to a segment‐valve graph are introduced to demonstrate the downstream segments of critical segments, and an improved segment‐valve graph with flow directions is proposed. The improved model is used to solve the valve isolation problem and evaluate the reliability of water distribution networks. The results show that the improved model can determine that the valve needs to be closed more quickly when a pipe burst occurs. In addition, we improve the traditional classical indicators based on the segment‐valve graph model. The new indicators based on the improved model can reflect the actual impact and the disposal difficulty of pipe network accidents more accurately and clearly. The proposed method can play a critical role in accident processing and reliability analysis of water distribution networks. This article is protected by copyright. All rights reserved.

environmental sciences,water resources,limnology
Better Water Demand and Pipe Description Improve the Distribution Network Modeling Results

Yingying Zhao,Y. Jeffrey Yang,Yeongho Lee,Srinivas Panguluri,Yu Shao

DOI: https://doi.org/10.1061/9780784480625.055

2017-01-01

Abstract:Distribution system modeling simplifies pipe network in skeletonization and simulates the flow and water quality by using generalized water demand patterns. While widely used, the approach has not been examined fully on how it impacts the modeling fidelity. This study intends to evaluate these consequences in a typical water distribution system. We first analyzed tracer test data at 13 locations using a calibrated EPANET model with generalized water demand patterns. Modeling results agree with actual measurements in six locations with high water demand and flow velocity near the storage tank, while fail to replicate the variations in network abundant of dead- ends and Tee/ Cross junctions. Then we further investigated the causes of model inaccuracy using real- time water demand data covering similar to 35% water users. This paper compares several levels of pipe skeletonization and water demand aggregation in water age simulation, and shows significant impacts on water age results because of discrete water demand at pipe nodes. The analysis reveals varying flow properties and the movement of highly aged water parcels in two types of pipe configurations. These results have the implications on network modeling and further studies of water quality simulations.
Research on water supply pipeline failure consequence assessment model

Chengzhi Zheng,Jinliang Gao,Wenyan Wu,Jichang Zhang,Wenjie He

DOI: https://doi.org/10.1109/ICNSC.2011.5874905

2011-01-01

Abstract:In order to evaluate the ability of the service network after taking off some valves in the event of one or more pipeline breakages, the paper has established the water supply pipeline failure consequence assessment model. The model was two hierarchical assessment model using an objective weighting method. It took the node demands decrease of affected pipelines, the node demands decrease and the pressure reduction of non-affected pipelines as three estimate indexes. All of parameters were treated as the properties of the node. The water supply pipeline failure consequences evaluation model based on water supply pipeline failure hydraulic model, which first redistributed node demands, and automatically adjusted the node demands under node pressure, and was calculated by genetic algorithm(GA). Through the simulation experiments in a small water distribution system, it showed that the model worked well. According to the assessment results with the model, the reasonableness of the valve's arrangement and the role of some pipelines can be effectively analyzed, and the research proposed measures to reduce the consequences of pipeline failure.
Pipe Burst Detection and Valve-turnoff Algorithm on Water Supply Pipe Network Based on GIS

REN Yong-chang,XING Tao,LIU Da-cheng

DOI: https://doi.org/10.3969/j.issn.1673-629x.2012.06.066

2012-01-01

Abstract:Dealing with urban water supply network tube rupture accident by using geographic information system can repair timely,reduce losses and provide analytic and decision-making function for scientific management of water undertaking.It is about the research on logical network,pipe burst detection,valve-turnoff analysis and so on.Firstly,it is about the establishing of logical network,constructing pipe network models based on the basic principles of graph theory,and adopting adjacent list to store data.Then,it is about pipe burst detection,establishing detection model by employing flow equilibrium method and making discussion and analysis on the model.Finally,it is about valve-turnoff analysis.Employ breadth-first traversal algorithm and recursive function theory to draw valve-turnoff plan,carry out analysis on expanded valve-turnoff and user influence and offer specific examples.The research content of the article can play an instructional role on pipe burst accident treatment of urban water supply pipe network.
Reliability Optimization Design Method of Integrated Valve Performance and Potential Failure

Chenyang Xiong,Donghao Liu,Feihong Mao,Shuanglong Zhao,Yugang Zhang

DOI: https://doi.org/10.1109/icrms59672.2023.00156

2023-01-01

Abstract:Valves are susceptible to fatigue fractures, long response times, and excessive leakages due to various influencing factors, directly impacting their safety and reliability. This study investigates the random uncertainties associated with performance and potential failure factors in a shifting hydraulic valve. It introduces an integrated analytical approach that combines the Monte Carlo method with uncertainty analysis, addressing both performance and potential failure considerations in reliability optimization design. The results obtained through the proposed method indicate that the reliability of the entire valve can reach 99.92%. This is a significant improvement of 65.49% compared to optimizing solely for performance and a 2.22 % increase compared to focusing solely on potential failure mitigation. The proposed method provides an effective approach for achieving optimal valve reliability design.
Application of the Accidents Prediction Model in Water Supply Network Rehabilitation

ZENG Xiao-bing,XIAO Nan,JIN Xi,GAO Jin-liang

DOI: https://doi.org/10.3969/j.issn.1007-9467.2013.03.034

2013-01-01

Abstract:Some indexes which are correlative with the level of deterioration of the pipes directly during rehabilitation of the water supply network,was analyzed.Several models of deterioration of water mains were introduced here,and the properties and advantages or disadvantages of each model were also analyzed.The result showed that these methods will enhance the reliability of rehabilitated pipes selection,and created a reliable basement for optimal rehabilitation scheme.
Reliability Segment Design in Single-Source District Heating Networks Based on Valve Network Models

Ding Mao,Peng Wang,Wei Wang,Long Ni

DOI: https://doi.org/10.1016/j.scs.2020.102463

IF: 11.7

2020-01-01

Sustainable Cities and Society

Abstract:As a kind of critical infrastructure, district heating networks (DHNs) ensure people's life and productivity in cold area. Optimizing the reliability of DHNs has been an urgent topic for many scholars. In this study, we defined reliability segments to build a valve network, and established branched and looped pipeline models. We varied the number, heat load, and length of the reliability segments to study their influence on reliability. Then, we proposed reliability design rules for single-heat-source branched and single-looped DHNs. For branched DHNs, the failure effect of an upstream reliability segment is more serious than that of a downstream segment. The core of these rules is to ensure the reliability segment closer to the heat source contains more heat load and few fault components. For single-looped DHNs, the failure effect scope of each reliability segment is only itself. The core of these rules is to ensure the reliability segment that cannot easily fail contains more heat load. Both sets of design rules are to improve the DHN reliability by reducing the fault probability of reliability segments with severe failure effect. Finally, a case study of reliability segment design on a single-looped DHN proved the effectiveness of the proposed design rules.
Modelling and engineering analysis of planning and rehabilitation of urban water supply network in Northeast of China

Xin ZHANG,Peng GUO,Qing ZHAO,Wei WANG,Min ZHANG,Jia YU,Jinliang GA

DOI: https://doi.org/10.19352/j.cnki.issn1671-4679.2016.03.005

2016-01-01

Abstract:The water distribution network rebuilding and extending modeling is an effective measure to exploit the potentialities of pipelines and reuse them , in order to decrease the high leakage rate and improve the safety of water supply . To enhance the stability of the entire water supply system ,a reasonable planning of water distribution in H City ,according to the practical situations in the cold region in North China ,can save investment , reduce operating costs , shorten the construction schedule and strengthen the abilities toward emergencies .It's necessary to plan the water distribution system with a reliable model to solve contradictions between supply and demand .Simulating operating conditions are analyzed in this paper by building a model of pipelines network in H City to optimize the layout ,make the pipe network match the water plant ,satisfy the demand and guarantee the safety of water supply .
Research Progress of the Reliability of Water Supply Network

陈雷,李威,袁一星,邱薇

DOI: https://doi.org/10.3969/j.issn.1009-0185.2012.04.013

2012-01-01

Abstract:According to the existing problems of Chinese water supply, the reliability of distribution pipe network re- search has been reviewed major advances in the reliability of distribution pipe network hydraulic reliability and wa- ter quality and reliability at home and abroad. To make recommendations, we must use the simulation experimented the practice of combining reliability.
Hydraulic and Water Quality Reliability of Water Distribution System under Uncertain Conditions

Yumin Wang,Guangcan Zhu

DOI: https://doi.org/10.1061/(asce)ps.1949-1204.0000676

IF: 1.916

2022-01-01

Journal of Pipeline Systems Engineering and Practice

Abstract:Reliability assessment plays a significant role in the planning, design, and operation of water distribution systems (WDS). Herein, pressure, flow, chlorine concentration, and water age are simulated by continuity, energy, and transport equations; and hydraulic, water quality, and system reliability assessments are proposed based on a comparison between simulated hydraulic and water quality conditions and the desired service level. Because the independent parameters in hydraulic and water quality simulations cannot be estimated accurately, a hydraulic and water quality reliability assessment based on Monte Carlo simulation was applied to a network under three uncertain levels under steady- and unsteady-states. The effects of uncertain parameters on hydraulic and water quality reliability under steady- and unsteady-states were evaluated and compared to obtain the most significant parameters. The results indicated that the mean hydraulic reliability decreases with an increase in the uncertainty level for various nodes under steady- and unsteady-states, while the regulation is not suitable for water quality reliability. Pipe diameters have the most significant effects on hydraulic reliability under steady-state conditions, and mean hydraulic reliability under unsteady-state conditions. Nodal demand, bulk decay coefficient, and wall decay coefficient have effects on water quality reliability under steady-state conditions, while the roughness coefficient and pipe diameter also have effects on mean water quality reliability under unsteady-state condition. The results obtained can give managers more information about network reliability under uncertain conditions.
Seismic Reliability Analysis of Urban Water Distribution Network

Li Jie,Wei Shulin,Liu Wei

DOI: https://doi.org/10.1080/15732479.2014.887121

2006-01-01

Abstract:Due to the huge destructive power of strong earthquakes, many breaks appear on water pipelines after such events. As a result, water leaks from these breaks, causing function loss of water distribution networks (WDNs). In order to evaluate the seismic performance of WDNs, these leaks cannot be ignored. In this paper, by adding a leakage model to the hydraulic equation of WDNs in a daily operation state, a new hydraulic equation is established to describe WDNs after the occurrence of earthquakes. As it is a stochastic equation, a random perturbation method is used to solve the equation and give the mean, standard deviation and skewness of the nodal head. In the meantime, a performance function is established to evaluate the reliability of WDNs. Three reliability analysis methods, a mean first-order second-moment method and two third-moment methods, are used to give the seismic functional reliability of WDNs. Meanwhile, two networks, a small WDN and an actual WDN which suffered serious damages during the Wenchuan Earthquake, 2008, are studied to compare the efficiency and precision of the three reliability methods.
Performance and Reliability Analysis of Water Distribution Systems under Cascading Failures and the Identification of Crucial Pipes

Qing Shuang,Mingyuan Zhang,Yongbo Yuan

DOI: https://doi.org/10.1371/journal.pone.0088445

IF: 3.7

2014-01-01

PLoS ONE

Abstract:As a mean of supplying water, Water distribution system (WDS) is one of the most important complex infrastructures. The stability and reliability are critical for urban activities. WDSs can be characterized by networks of multiple nodes (e. g. reservoirs and junctions) and interconnected by physical links (e. g. pipes). Instead of analyzing highest failure rate or highest betweenness, reliability of WDS is evaluated by introducing hydraulic analysis and cascading failures (conductive failure pattern) from complex network. The crucial pipes are identified eventually. The proposed methodology is illustrated by an example. The results show that the demand multiplier has a great influence on the peak of reliability and the persistent time of the cascading failures in its propagation in WDS. The time period when the system has the highest reliability is when the demand multiplier is less than 1. There is a threshold of tolerance parameter exists. When the tolerance parameter is less than the threshold, the time period with the highest system reliability does not meet minimum value of demand multiplier. The results indicate that the system reliability should be evaluated with the properties of WDS and the characteristics of cascading failures, so as to improve its ability of resisting disasters.
Research on measuring calculation for water-supply pipe network based on hydraulic model

WANG Yun-jue,XIN Kun-lun,TAO Tao

2011-01-01

Abstract:Aiming at the measuring problems for urban water-supply pipe network,it taking the water-supply pipe network in Zhenjiang as the example,points out the principle for the measuring division of pipe network's water volume,establishes the measuring division scheme,evaluates the reliability for water power and water quality for division scheme,and points out the suggestions and advice for scheme implementation.
A Superposed Model for the Pipe Failure Assessment of Water Distribution Networks and Uncertainty Analysis: A Case Study

Qiang Xu,Zhimin Qiang,Qiuwen Chen,Kuo Liu,Nan Cao

DOI: https://doi.org/10.1007/s11269-017-1899-8

IF: 4.426

2018-01-01

Water Resources Management

Abstract:Pipe failure often occurs in water distribution networks (WDNs) and results in high levels of water loss and socio-economic damage. Physical-based, statistical and data-driven models have been developed to estimate pipe failure rates (failures per km of pipe per year) to efficiently manage water losses from WDNs and to ensure safe operations. Due to the complexities of pipe failure patterns, we develop a superposed statistical model to depict the relationship between pipe failure rate and pipe age. The model’s level of uncertainty was then quantified by simulating pipe failures as Poisson numbers. Part of Beijing’s WDN is taken as a study case, and pipe failure data for a 4-year period, as well as pipe properties, are collected to develop the pipe failure model. The case study results show that the pipe failure rates vary with time in a non-monotonic manner and that the proposed model captures pipe failure behaviour with an R2 value of 0.95. A 95% confidence interval of modelled pipe failures for each pipe age group is used to describe the uncertainty level of the model. We find that 88% of the observations fall under the 95% confidence interval. The established model could be applied to prioritize pipes with higher failure rates to optimize pipe replacement/rehabilitation strategies. Our uncertainty analysis of this model can help utility managers understand the model’s reliability and formulate reasonable WDN management plans.

Effect of the Valve Setting to the Reliability of the Water Supply Pipelines Net

Review on Reliability Analysis Methods for Water Distribution System

Method and Application of Seismic Reliability Assessment for Urban Water Supply Pipeline

Pipe burst hydraulic model of water distribution system and pipe burst location

Technologies For Risk Evaluation And Decision-Making Of The Failure In Municipal Water Distribution System

Valve-Based Reliability Assessment for Water Distribution Systems

A Study of Dynamic Characteristics of Valve Control Hydr Aulic System with Long Pipeline

Improvement of the Segment‐valve Model for Solving the Valve Isolation Problem and Evaluating the Reliability of Water Distribution Networks

Better Water Demand and Pipe Description Improve the Distribution Network Modeling Results

Research on water supply pipeline failure consequence assessment model

Pipe Burst Detection and Valve-turnoff Algorithm on Water Supply Pipe Network Based on GIS

Reliability Optimization Design Method of Integrated Valve Performance and Potential Failure

Application of the Accidents Prediction Model in Water Supply Network Rehabilitation

Reliability Segment Design in Single-Source District Heating Networks Based on Valve Network Models

Modelling and engineering analysis of planning and rehabilitation of urban water supply network in Northeast of China

Research Progress of the Reliability of Water Supply Network

Hydraulic and Water Quality Reliability of Water Distribution System under Uncertain Conditions

Seismic Reliability Analysis of Urban Water Distribution Network

Performance and Reliability Analysis of Water Distribution Systems under Cascading Failures and the Identification of Crucial Pipes

Research on measuring calculation for water-supply pipe network based on hydraulic model

A Superposed Model for the Pipe Failure Assessment of Water Distribution Networks and Uncertainty Analysis: A Case Study