Abstract:Experimental vapor–liquid equilibrium (VLE) data for binary systems of ethanol or water with four ionic liquids (ILs) comprising 1-butyl-3-methylimidazolium cation and different anions were measured at atmospheric pressure within a broad region of IL concentrations, IL mole fraction ranging between 0 and 0.7 or even 0.87. Siwoloboff procedure of vapor–liquid phase transition temperature measurement was applied to estimate VLE of the binary mixtures. Obtained t–x data were fitted assuming ideal vapor and non-ideal liquid phase behavior, using the original NRTL equation to calculate component activity coefficients. VLE description results are presented in form of equilibrium diagrams and as the variation of activity coefficients with mixture composition. Quality of the VLE data fitting was assessed based on root mean square deviations and mean deviations in temperature. Some experimental binary t–x data sets were compared to those available in literature (measured in much narrower concentration range) or predicted from ternary VLE data. The selection of ILs in this study was related to the separation of ethanol−water mixture by extractive distillation. Principal IL selection criterium was its ability to affect the ethanol–water relative volatility. Thermodynamic description of the VLE data of IL-containing systems within a wide concentration range is an essential building block of the mathematical model of separation devices, especially in case of regeneration equipment where concentrated IL is present.

Measurement of Isoplethic Vapor-Liquid Equilibrium Data by Using Inclined Ebulliometer

Vapor−Liquid Equilibria for the Quaternary System Ethanol + Acetone + Benzene + Hexane

Isothermal Vapor-Liquid Equilibrium of Binary Mixture (1，1，1，2-Tetrafluoroethane+DME) at Temperature Range From (253.15 to 273.15) K

Measurement of Vapor Liquid Equilibrium for System of Ethyl Acetate-Pyridine at Different Pressures

Isobaric Vapor-Liquid Equilibrium for Acetic Acid+dimethyl Sulfoxide

Vapor–liquid equilibria for water + acetic acid + (N,N-dimethylformamide or dimethyl sulfoxide) at 13.33 kPa

(Vapour+liquid) Equilibria for (2,2-Dimethoxypropane+methanol) and (2,2-Dimethoxypropane+acetone)

Vapor−Liquid Equilibria for the Binary Mixture Α-Pinene + Octane

Isothermal and Isobaric Vapor–liquid Equilibria for the Binary System Trimethylbenzoquinone + N-Hexanol

MEASUREMENTS AND THERMODYNAMIC MODELING OF VAPOR-LIQUID EQUILIBRIA FOR BINARY SYSTEMS OF ISOPROPYL CHLOROACETATE WITH CYCLOHEXANE, ISOPROPANOL AND BENZENE AT 101.3 kPa

Vapor–Liquid Equilibrium for the Mixture Methane (CH4) + Ethane (C2H6) over the Temperature Range (126.01 to 140.01) K

Isothermal and Isobaric Vapor-Liquid Equilibria of Α-Pinene+ Cis-Pinane + 1-Hexanol System

Isothermal and Isobaric Vapor−Liquid Equilibria of the Ternary System of 2,2-Dimethoxypropane + Acetone + Methanol

Vapor−Liquid Equilibria for the Binary Mixtures Dehydrolinalool + 1-Propanol and Dehydrolinalool + 1-Butanol

Isobaric Vapor-Liquid Equilibrium Data for Tetrahydrofuran + Acetic Acid and Tetrahydrofuran + Trichloroethylene Mixtures

Isobaric (vapour+liquid) Equilibria of (Linalool+1-Propanol) and (Linalool+1-Butanol)

Isobaric Vapor–Liquid Equilibria for (water + 1-Methoxy-2-propanol), (water + 2-Methoxy-1-propanol), and (1-Methoxy-2-propanol + 2-Methoxy-1-propanol) at 101.3 Kpa

Isobaric Vapor–Liquid Equilibrium for the Binary Systems (diethylamine + Ethanol), (ethanol + N,N-Diethylethanolamine), and (diethylamine + N,N-Diethylethanolamine) at P = (80.0 and 40.0) Kpa

(Vapour + Liquid) Equilibria for (2-Ethoxypropene + Acetone) and (2-Ethoxypropene + Butanone)

VLE measurement of binary systems 1-butyl-3-methylimidazolium-based ionic liquids and ethanol or water

Isobaric Vapor−Liquid Equilibria and Excess Volumes for the Binary Mixtures Water + Sulfolane, Water + Tetraethylene Glycol, and Benzene + Tetraethylene Glycol