Abstract:Single-domain Y–Ba–Cu–O (YBCO) bulk superconductors can be widely used in the superconducting maglev, cryomagnets, motors/generators fields. In order to improve the performance of the YBCO bulk superconductors further, in this article, nano-CeO2 doped YBCO bulk superconductors were fabricated by two infiltration growth techniques (011-IG and 211-IG) respectively, in which two solid pellets of compositions Y2O3+1.15BaCuO2+0.1CuO+1wt.% nano-CeO2 and Y2BaCuO5 (Y-211)+1wt.% nano-CeO2 were employed. And a novel pit-type seeding mode was used to prevent the movement of the film seed during the heat treatment process, then the growth morphology, microstructure and superconducting properties of the samples were investigated. The results show that, at low doping level (1wt.%), the normal growth of the YBCO crystal is not affected, and fully-grown single-domain YBCO bulk superconductors can be successfully prepared by the two techniques. Furthermore, the positions of the seeds have no any movement, which proves the effectiveness of the new seeding mode. The perpendicular growth sector boundaries on the top surface of the samples and clear (00l) series X-ray diffraction (XRD) peaks both prove the high c-axis orientation and high growth quality of the samples. The scanning electron microscopy (SEM) results indicate that, the nano-CeO2 doping can effectively refine the size of the Y-211 micro-particles in the bulk superconductors, and this method is valid for both the two techniques. Low-temperature magnetization measurement shows that, the nano-CeO2 doped sample prepared by the 011-IG method displays obviously superior Jc property than the undoped sample at low fields, which indicates that the refined Y-211 particles can effectively enhance the δl-type pinning. In addition, compared with the 211-IG-processed sample, the 011-IG-processed sample performs better in the aspects of levitation force, microstructure and Jc property, thus the 011-IG method is a more promising preparation process. The results of this study are important for increasing the performance of the YBCO bulk superconductors as well as optimizing the fabrication technique further.

Effects of Processing Parameters on the Grain Growth and Levitation Force of Large Bulk YBCO Superconductors

The Effect of Grain-Domain-Size on Levitation Force of Melt Growth Processing Ybco Bulk Superconductors

Seed-Size Effect on the Growth and Superconducting Performance of Ybco Single-Grain Bulks

A practical processing method for fabrication of single-domain YBCO superconductors using large-sized GdBCO seed crystals

Effects of Liquid Source Mass and Slow-Cooling Time on the Infiltration Growth of Single-Grain Y–Ba–Cu–O Bulk Superconductors

Effect of seed orientations on the crystallization characteristics and the magnetic levitation properties of single domain YBCO bulk superconductors

Effect of the grain alignment on the levitation force in single domain YBa2Cu3Oy bulk superconductors

The Grain-Alignment and Its Effect on the Levitation Force of Melt Processed Ybco Single-Domained Bulk Superconductors

The Effect of Magnet Configurations on the Levitation Force of Melt Processed Ybco Bulk Superconductors

Infiltration Growth and Crystallization Characterization of Single-Grain Y–Ba–Cu–O Bulk Superconductors

Fabrication and Properties of Nano-Ceo<sub>2</sub> Doped YBCO Bulk Superconductors

Insetting Multi-seeds for YBCO Single Domain Depth Growth

Two-layer Batch-Process of YBa2Cu3Ox Bulk Superconductors Induced by NdBa2Cu3Ox Film-Seeds

Properties of superconductor YBCO single domain prepared by top seed powder melting process

Effect of Cooling Time on the Morphology and Levitation Force of Single‐Domain Gd–Ba–Cu–O Bulk Superconductors by the Infiltration and Growth Technique

Study on Microstructure Characterization of YBCO Bulk Prepared by Directional Seeded Infiltration-Growth

Effect of the Different Particle Sizes Gd_2Ba_4CuNbO_y Nanoparticles Doping on the Properties of GdBCO Bulk Superconductor

Fabrication and Microstructure Characteristic of YBCO Bulk by Directional Top-Seeded Power Melting Process

A Novel Method to Enhance the Content and size of Y-211 Particles in YBCO bulk Superconductors Grown by RE+011 TSIG Process

The Effects of Radial Temperature Gradient on the Macrostructure and Properties of MTG Large Bulk YBCO Superconductor