Abstract:The rapid solidification processes of undercooled Ti-(47, 50, 54) at.% Al alloys were investigated by electromagnetic levitation (EML) method combined with a high-speed photoelectric detector. The maximum undercoolings of the three liquid alloys were 376 K, 352 K and 316 K, respectively. Recalescence processes corresponding to the primary dendrite growth and subsequent phase transition were recorded at various undercoolings. The primary dendrite growth velocity V meets a double exponential relationship with the undercooling ΔT. Besides, a novel formula with physical meaning is proposed to explain that the more ordered liquid metal atoms accelerate the primary dendrite growth. Three recalescences are found at all undercoolings for Ti-47 at.% Al alloy and at high undercoolings for Ti-50 at.% Al alloy. The microstructures of solidified Ti-47 at.% Al alloys successively appear as coarse lamellar dendrites and finally evolve to refined parallel lamellar dendrites with the increasing undercooling. When ΔT rises, the microstructures of solidified Ti-50 at.% Al alloys appear from coarse primary dendrites and interdendritic dendrites to refined lamellar dendrites. In the process from low undercooling to high undercooling, the primary phase of undercooled Ti-54 at.% Al alloys changes from α-Ti (α) to γ-TiAl (γ) and the microstructures of solidified alloys evolve from spherical primary dendrites and matrix phases to cellular dendrite phases. Meanwhile, for the Ti-(47, 50) at.% Al, the transformation temperature of metastable intermediate α phase decreases with the increase of undercooling. Moreover, the microhardness of the three solidified alloys reaches the maximum when the undercoolings are 185 K, 270 K and 316 K, respectively.

Primary Cellular/Dendritic Spacing Selection of Al-4.95% Zn Alloy under Near-Rapid Directional Solidification Condition

Primary Cellular/dendritic Spacing Selection of Al–Zn Alloy During Unidirectional Solidification

CELLULAR SPACING SELECTION OF Al-0.53Zn ALLOY UNDER NEAR-RAPID DIRECTIONAL SOLIDIFICATION CONDITION

Primary cellular/dendritic spacing selection in rapidly solidified peritectic alloy

On Primary Dendritic Spacing During Unidirectional Solidification

History-dependent Selection of Primary Cellular/dendritic Spacing During Unidirectional Solidification in Aluminum Alloys

Experimental and simulation of primary dendrite spacing in directional solidification of Al-7Si-0.36Mg alloy

Primary spacing selection of constrained dendritic growth

Cellular Spacing Selection Of Cu-Mn Alloy Under Ultrahigh Temperature Gradient And Rapid Solidification Condition

Dendrite tip splitting and primary spacing adjustment mechanism of Al-Cu alloy during directional solidification

Effects of the Growth Rate on Microstructures and Room Temperature Mechanical Properties of Directionally Solidified Mg-5.2Zn Alloy

Influence of Temperature Gradient on Microstructure and Microhardness of Directionally Solidified Al-Zn-Mg-Cu Alloy

Influence of Directional Solidification Variables on Primary Dendrite Arm Spacing of Ni-based Superalloy DZ125

Effect of Al-Cu Alloys Diameter on Thermal Gradient and Primary Dendrite Arm Spacing During Directional Solidification

Effect of Sample Diameter on Primary Dendrite Spacing of Directionally Solidified Al-4%Cu Alloy

Thermal and Solute Diffusion During Dendrite Growth of Mg-5wt.%Zn Alloy

Primary Dendrite Arm Spacing During Unidirectional Solidification of Pb–Bi Peritectic Alloys

Primary Dendrite Spacing Selection During Directional Solidification of Multicomponent Nickel-Based Superalloy: Multiphase-Field Study

Primary Dendrite Growth Kinetics and Rapid Solidification Mechanism of Highly Undercooled Ti-Al Alloys

Influence of Growth Rate on Microstructural Length Scales in Directionally Solidified NiAl-Mo Hypo-Eutectic Alloy

Spacing Characterization in Al-Cu Alloys Directionally Solidified Under Transient Growth Conditions