Abstract:Oxidative cracking of polyolefins into functionalized molecules or oligomers promises the chemical upcycling of plastic wastes. In this work, we develop a novel approach to polyolefin waste upcycling that utilizes low-temperature oxidative cracking combined with dynamic cross-linking to produce recyclable elastomers. High-density polyethylene is oxidized into functionalized oligomers with end carboxyl groups at 110 degrees C, achieving tunable number-average molecular weights (M n) ranging from 1500 to 5500 Da at distributions (D) between 2.91 and 3.33. These oligomers with high crystallinity directly react with amorphous cis-polybutadiene containing pendant epoxy groups (an oxidized product of cis-polybutadiene) through esterification, forming a dynamically cross-linked elastomer. The elastomer displays a low glass transition temperature (T g) of approximately -100 degrees C while maintaining a melting point (T m) above 80 degrees C; it showcases a Young ' s modulus (E) of 12.0 +/- 0.4 MPa, elongation at break (epsilon) of 600 +/- 28%, tensile strength (sigma) of 16.4 +/- 0.8 MPa, tensile toughness (U T) of 46.0 +/- 3.5 MJ center dot m-3, and a good elasticity with 81.8% elastic recovery in a 10-cycle tensile test, even higher than that of commercial POEs such as POE-8150 of Dow Company. The dynamic ester-bond-based cross-linking enables the elastomer to be reprocessed. Our study introduces an efficient chemical upcycling process for polyolefin wastes, eliminating the need for tedious separation steps of cracking products.

Mechanical properties of polyolefin elastomers crosslinked by peroxide

Mechanical properties of polyolefin elastomers

Preparation Of Comb-Shaped Polyolefin Elastomers Having Ethylene/1-Octene Copolymer Backbone And Long Chain Polyethylene Branches Via A Tandem Metallocene Catalyst System

Synthesis and Characterization of Polyolefin Thermoplastic Elastomers: A Review

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Study on Crosslinking of Polyethylene–Octene Elastomer with Dicumyl Peroxide

Crystallization, structure, and enhanced mechanical property of ethylene‐octene elastomer crosslinked with dicumyl peroxide

Effects of Dynamic Crosslinking on Crystallization, Structure and Mechanical Property of Ethylene-Octene Elastomer/EPDM Blends

Thermal, mechanical, and dielectric behaviors of crosslinked linear low density polyethylene/polyolefin elastomers blends

Study on Mechanical Properties of Polyurethane Cross-Linked P(E-co-T)/PEG Blended Polyether Elastomer

Understanding the effect of silane crosslinking reaction on the properties of PP/POE blends

The Effect of Dialkyl Peroxide Crosslinking on the Properties of LLDPE and UHMWPE

Modified ethylene/α‐octene co‐polymer composites based on dual toughening of hydrogen bonding network and nanospheres

Realizing Simultaneous High‐temperature Strength and Low‐temperature Elongation in Polyolefin Elastomer Toughened Polypropylene Via Controlling the Dispersed Phase Size

Performance Evaluation Of Silane Crosslinking Of Metallocene-Based Polyethylene-Octene Elastomer

Dynamically Cross-Linked Polyolefin Elastomers with Highly Improved Mechanical and Thermal Performance

Chemically Crosslinked Crystalline Thermoplastic Polyolefin Elastomer with Good Elasticity and Improved Thermo-Mechanical Properties

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Preparation and Properties of Ethylene Octane Copolymer Blends with High Strength and Polarity

Structure and mechanical properties of SRP/HDPE/POE (EPR or EPDM) composites