Abstract:In this paper a large-scale pulsed corona system is described in which pulse parameters such as pulse rise-time, peak voltage, pulse width and energy per pulse can be varied. The chemical efficiency of the system is determined by measuring ozone production. The temporal and spatial development of the discharge streamers is recorded using an ICCD camera with a shortest exposure time of 5 ns. The camera can be triggered at any moment starting from the time the voltage pulse arrives on the reactor, with an accuracy of less than 1 ns. Measurements were performed on an industrial size wire-plate reactor. The influence of pulse parameters like pulse voltage, DC bias voltage, rise-time and pulse repetition rate on plasma generation was monitored. It was observed that for higher peak voltages, an increase could be seen in the primary streamer velocity, the growth of the primary streamer diameter, the light intensity and the number of streamers per unit length of corona wire. No significant separate influence of DC bias voltage level was observed as long as the total reactor voltage (pulse + DC bias) remained constant and the DC bias voltage remained below the DC corona onset. For those situations in which the plasma appearance changed (e.g. different streamer velocity, diameter, intensity), a change in ozone production was also observed. The best chemical yields were obtained for low voltage (55 kV), low energetic pulses (0.4 J/pulse): 60 g (kWh)(-1). For high voltage (86 kV), high energetic pulses (2.3 J/pulse) the yield decreased to approximately 45 g (kWh)(-1), still a high value for ozone production in ambient air (RH 42%). The pulse repetition rate has no influence on plasma generation and on chemical efficiency up to 400 pulses per second.

Construction of Discharging Electrodes in Ozone Generator

Analysis of the Discharging of a New Board-Shaped Ozone Generator

Analysis and Prospect on Key Technology of High-voltage Discharge for Environmental Engineering Study and Application

Characteristics of Ozone Generation Produced by Dielectric Barrier Discharge

A novel dielectric barrier discharge ozone generator with excellent microdischarge temperature behavior

Magnetic field improving the ozone production in an atmospheric pressure surface dielectric barrier discharge: understanding the physico-chemical mechanism behind the low energy consumption

Experimental Study on the Generation of Ozone Using High Frequency Dielectric Barrier Discharge

Electrochemical Oxygen Generator With 99.9% Oxygen Purity and High Energy Efficiency

Formation of Active Species by Bipolar Pulsed Discharge in Water

Development of dielectric barrier discharge-type ozone generator constructed with piezoelectric transformers: effect of dielectric electrode materials on ozone generation

Characteristics of Electrode-Water-Electrode Discharge and Its Application to Water Treatment

Characteristic of Multi-Channel Dielectric Barrier Discharge Reactor and Its Aapplication in HCHO Purification

Promotion Effect of Micro-Hole in Dielectric on Ozone Generation of Dielectric Barrier Discharge

Removal of Air Pollutant by a Spike-Tubular Electrostatic Device: Multi-stage Direct Current Corona Discharge Enhanced Electrostatic Precipitation and Oxidation Ability

Study of ozone generation in an atmospheric dielectric barrier discharge reactor

Experimental Study of Packed-bed Dielectric Barrier Discharge Applied on Ozone Reactor

Theoretical Analysis of Ozone Generation by Pulsed Dielectric Barrier Discharge in Oxygen

Advances in Electrochemical Generation Technology of Ozone

Temporal development and chemical efficiency of positive streamers in a large scale wire-plate reactor as a function of voltage waveform parameters

Anodic Materials for Electrocatalytic Ozone Generation

Ozone Production with Dielectric Barrier Discharge from Air: the Influence of Pulse Polarity