Abstract:A numerical double-freeform-optical-surface design method is proposed for beam shaping applications. In this method, both the irradiance distribution and the wavefront of the output beam are taken into account. After numerically obtaining the input-output ray mapping based on Energy conservation using the variable separation method, the two freeform optical surfaces can be constructed simultaneously and point by point corresponding to the ray mapping based on Snell's law and the constancy of the optical path length. The method is only applicable for separable irradiance distributions. However, such a restriction is fulfilled by many practical laser beam shaping examples. Moreover, the restriction can simplify the computation considerably. Therefore, the method may be quite useful in practice, although it is not applicable to more general cases. As an example, the method was applied to design a two-plano-freeform-lens system for transforming a collimated 20 mm Gaussian laser beam (beam waist: 5mm) into a uniform 10 x 40 mm(2) rectangular one without changing the wavefront. Simulation results show that we can obtain a dual lens beam shaping system with the relative root mean square deviation of the irradiance ranging from 0.0652 to 0.326 and the power ratio concentrated on the desired region ranging from 97.5% to 88.3% as the output beam transfers from 0mm to 1000mm. (C)2013 Optical Society of America

Binary Optics Used in High Power Laser Shaping

Sharper Focal Spot below Λ/4 of Azimuthally Polarized Illumination Phase-Encoded by the Binary 0/π Phase Plate

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Design and Application of Binary Hybrid Optical System Used in the Visible Spectra

Binary Optics Beam Mode Transformer and Its Application in High-Power Laser Processing

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Binary photon sieve

Design Beam Shapers with Double Freeform Surfaces to Form a Desired Wavefront with Prescribed Illumination Pattern by Solving a Monge-Ampère Type Equation

A New Hybrid Algorithm for Designing the Continuous Phase Screen Used for Beam Shaping

Beam-Shaping Application in Laser Heat Processing

Design And Manufacture Of Continuous Phase Diffractive Optical Element For Beam Transform

Optimized Binary, Phase-Only, Diffractive Optical-Element With Subwavelength Features For 1.55 Mu-M

Binary phase plate for high-intensity non-diffracting hollow beam structure

Binary optics in China

Beam shaping system design using double freeform optical surfaces.

Large Aperture Continuous Phase Diffractive Optical Element to Realize Uniform Focal Spot

Optimized binary, phase-only, diffractive optical element with subwavelength features for 1.55 μm

High-efficiency Multiple-Phase-level Lenslet Array

Continuous Phase Diffractive Optical Element for Uniform Focal Spot

Binary optical elements used for agile beam transformation and their application

Design of Binary Optics Using Improved Two-Step Simulated Annealing Algorithm