Abstract:The analytical solution is derived for the plane strain stress field around a cylindrical void in a hexagonal close-packed single crystal with three in-plane slip systems oriented at the angle π/3 with respect to one another. The critical resolved shear stress on each slip system is assumed to be equal. The crystal is loaded by both internal pressure and a far-field equibiaxial compressive stress. The deformation field takes the form of angular sectors, called slip sectors, within which only one slip system is active; the boundaries between different sectors are radial lines. The stress fields are derived by enforcing equilibrium and a rigid, ideally plastic constitutive relationship, in the spirit of anisotropic slip line theory. The results show that each slip sector is divided into smaller regions denoted as stress sectors and the stress state valid within each stress sector is derived. It is shown that stresses are unique and are continuous within stress sectors and across stress sector boundaries, but the gradient of stresses is not continuous across the boundaries between stress sectors. The solution shows self-similarity in that the stresses over the entire domain can be determined from the stresses within a small region adjacent to the void by invoking certain scaling and symmetry properties. In addition, the stress state exhibits periodicity along logarithmic spirals which emanate from the void. The results predict that the mean value of in-plane pressure required to activate plastic deformation around a void in a single crystal can be higher than that necessary for a void in an isotropic material and is sensitive to the orientation of the slip systems relative to the void.

A Note on the Effect of Surface Energy and Void Size to Void Growth

A study of the void size effect based on the Taylor dislocation model

Position and Size Effects on Voids Growth in Nonlinear Elasticity

The Size Effect on Void Growth in Ductile Materials

The Void Size Effect in Metallic Materials

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

A Void Growth Model Considering the Bauschinger Effect and Its Application to Spall Fracture

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

A cavitation and dynamic void growth model for a general class of strain-softening amorphous materials

The Effect of Nucleation Time on the Growth of a Microvoid in a Viscoelastic Material

High-strain-rate Void Growth in High Entropy Alloys: Suppressed Dislocation Emission = Suppressed Void Growth

The mechanistic origins of heterogeneous void growth during ductile failure

Theoretical Models of Void Nucleation and Growth for Ductile Metals under Dynamic Loading: A Review

Growth of random polyhedral void in structural steel based on micromechanical RVE simulations

Cylindrical void in a rigid-ideally plastic single crystal II: Experiments and simulations

Effects of loading rate on void growth in amorphous glassy polymers

Cylindrical void in a rigid-ideally plastic single crystal III: Hexagonal close-packed crystal

A size-dependent ductile fracture model: Constitutive equations, Numerical implementation and Validation

Modelling the effects of void swelling and spatial heterogeneity on the fracture of metallic materials by crystal plasticity

Investigation on void growth and coalescence in single crystal copper under high-strain-rate tensile loading by atomistic simulation

The Analysis Of Contact Mechanics Considering The Adhesive Effect And Micro-Void Damage