Abstract:Vehicles commonly suffer from the narrow-band noises and vibrations, usually a superposition of multiple sinusoidal signals, due to the excitations of engines, electrical motors, gear boxes, and other rotating mechanical parts. These excitations are transmitted to a reference point of some structure with certain transmission paths. The vibration signal measured at the reference point can be used for power system monitoring, fault diagnosis, modal analysis, noise analysis, etc. For convenience, researchers in a laboratory usually use shakers to generate expected narrow-band vibration signals acting on the vehicle structure reference points to simulate the vibration signals. However, there is a prominent difficulty in ensuring the amplitude and phase accuracy of each sub-frequency component simultaneously. In order to improve the accuracy of generating the expected vibration signal, this paper presents a multi-source vibration simulation control technology based on the tracking filter method. The main idea is to use the tracking filter to estimate the amplitude and phase of the target sub-frequency component accurately. Further, on the target sub-frequency, the drive signal of shakers is then corrected based on the amplitude and phase errors to achieve a more accurate target vibration signal. The amplitude and phase of each sub-frequency component in the excitation signal can be controlled independently. Compared with other Fast Fourier Transform (FFT)-based frequency domain analysis algorithms and numerical methods by solving the equations, the tracking filter method has a higher frequency resolution and higher accuracy. It can be easily realized in real time applications due to its simplicity. Finally, verification experiments are completed. The experimental results show that the multi-source vibration simulation control technology presented in this paper can achieve high-precision amplitude and phase on each sub-frequency component of the target vibration signals, which contain up to eight sub-frequency components.

Study on Expected Frequency Characteristics Control in Hardware-in-the-Loop Simulation

Research On Control Technologies For A High-Precision Multi-Source Vibration Simulation System

Simulation of Precision Flow Control System Based on MATLAB/Simulink

Hardware-in-the-Loop Simulation of a Dynamic Process by Compensation of the Transfer System

H∞ synchronization for a class of discrete-time nonlinear systems with interval time-varying delays

Modeling and Theoretical Analysis of Hardware-in-the-loop Simulation Part Two Analysis of Interface, Stability and Phase Shift

Inverse Model Control for Inner Loop of Control Loading System on Flight Simulator

Hardware-in-the-loop simulation for contact dynamics in space

Discrete-Time Compensation Technique for Real-Time Hybrid Simulation

A Novel Control System Simulation Modeling Method Considering the Real Hardware Platform and the Software Structure

An Adaptive Delay Compensation Method Based on a Discrete System Model for Real-Time Hybrid Simulation

A Passivity-Based Velocity Control Method of Hardware-in-the-Loop Simulation for Space Robotic Operations

Precise timing of HLA-based hardware-in-loop simulation for vehicles

Adaptive Feedforward and Feedback Compensation Method for Real-time Hybrid Simulation Based on a Discrete Physical Testing System Model

Recursive Predictive Optimal Control Algorithm for Real-time Hybrid Simulation of Vehicle–Bridge Coupling System

Xpc Based Hardware-in-the-loop Simulation of Electro-Optical Platform Systems

A Controller HIL Testing Approach of High Switching Frequency Power Converter Via Slower-Than-Real-Time Simulation

Real-Time Simulation For Electric Powersteering Control System

Research on hardware-in-the-loop simulation for hybrid powertrain

A Force Compensation Approach Toward Divergence of Hardware-In-The-Loop Contact Simulation System for Damped Elastic Contact

A Robotic Hardware-in-the-Loop Simulation System for Flying Objects Contact in Space.