Abstract:Bi3+ doped Ti/Sb-SnO2/PbO2 electrode materials were fabricated by electrodeposition to improve their electrochemical performance in zinc electrowinning. The surface morphology, chemical composition, and hydrophilicity of the as-prepared electrodes were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and contact angle. An electrochemical measurement and an accelerated lifetime experiment were also conducted to investigate the electrocatalytic performance and stability of the electrodes. The results show that the Bi3+ modification electrode has an important effect on the coating morphology, the crystal structure, the surface hydrophilicity, the electrocatalytic activity, and the stability. The electrode prepared from the solution containing 2 mmol·L−1 Bi(NO3)3 (marked as the Ti/Sb-SnO2/2Bi-PbO2 electrode) exhibits the best hydrophilicity performance (θ = 21.6°) and the longest service life (1196 h). During the electrochemical characterization analysis, the Ti/Sb-SnO2/2Bi-PbO2 electrode showed the highest oxygen evolution activity, which can be attributed to it having the highest electroactive surface (qT* = 21.20 C·cm−2) and the best charge-transfer efficiency. The DFT calculation demonstrated that the doping of Bi3+ leads to a decrease in the OER reaction barrier and an increase in the DOS of the electrode, which further enhances the catalytic activity and the conductivity of the electrode. Moreover, the simulated zinc electrowinning experiment demonstrated that the Ti/Sb-SnO2/2Bi-PbO2 electrode consumes less energy than other electrodes. Therefore, it is expected that the Bi3+ modified electrode will become a very promising electrode material for zinc electrowinning in the future.

Electrochemical Behaviors of Bi (iii) in Dimethylsulfoxide

Electrochemical and kinetic studies on the electrolytic extraction of Gd on Bi electrode in LiCl-KCl melt

Electrodeposition of Bi from Choline Chloride-Malonic Acid Deep Eutectic Solvent

Electrochemical Behavior of Th(IV) on the Bismuth Electrode in LiCl–KCl Eutectic

Electrochemical Properties of BiCl3 in LiCl-KCl Eutectic

The electrochemical behavior of Bi(Pb)SrCaCuO superconductors in aqueous solutions

Voltammetric Behavior of Bismuth(III) in Dimethyl Sulfoxide- and Dimethylformamide-Containing Aqueous Organic Electrolytes

Nucleation and Growth of Bismuth Electrodeposition from Alkaline Electrolyte

Electrochemical and Thermodynamic Properties of Pr on the Liquid Bi Electrode in LiCl-KCl Eutectic Melt

Electrochemical Properties of Bismuth Oxide Thin Films Prepared by Pulsed Laser Deposition

Electrical conductivity and conduction mechanisms in (Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>)<sub>1−x</sub>(BiScO<sub>3</sub>)<sub>x</sub> (0.00 ≤ <i>x</i> ≤ 0.25) solid solutions

Experimental determination of the electrochemical properties of bismuth chloride in eutectic LiCl–KCl and LiCl–KCl–CaCl2 molten salts

Influence of Bi3+ Doping on Electrochemical Properties of Ti/Sb-SnO2/PbO2 Electrode for Zinc Electrowinning

Electrocrystallization of Bi on Au(111) in an Acidic Chloroaluminate Ionic Liquid

Electrochemical Reaction of Lithium with Nanostructured Thin Film of Antimony Trioxide

Electrochemical Reaction of Lithium with Orthorhombic Bismuth Tungstate Thin Films Fabricated by Radio-Frequency Sputtering

First-principles View of the Interaction Between Li and Bi4Ge3O12 Anodes.

ELECTROCHEMICAL BEHAVIOR OF BISMUTH IONS IN CITRATE SOLUTIONS

Theoretical probing of monolayer BiI 3 as an electrolyte separator and 3d-TM-doped BiI 3 as electrocatalysts toward high-performance lithium–sulfur batteries

Ex-situ XRD Studies of CoSb3 Compound As the Anode Material for Lithium Ion Batteries

Electrochemical and Structural Investigation of the Mechanism of Irreversibility in Li3V2(PO4)3 Cathodes