Abstract:Background: A simple, low cost and highly sensitive catalytic hydrogen wave (CHW) method has developed for the investigation of Manganese(II) in ammonium 4-phenylpiperazine-1- dithiocarbamate and ammonium 4-benzylpiperidine-1-dithiocarbamate in various environmental and biological samples using D.C. polarography. This procedure was based on the reaction of Mn(II) in APP-DTC/ABP-DTC in the presences of NH 4 Cl-NH 4 OH medium at pH 6.6 and 7.2 respectively. The resulting oxidation signals were obtained at -0.78 V and -0.64 V vs SCE, owing to the CHWs. Different experimental conditions such as pH effects, background electrolyte (NH 4 Cl-NH 4 OH) effects and DTCs and Mn(II) ion effects have been studied. The current method was effectively employed for the testing of Mn(II) in different environmental and biological samples and attained recovery percentages (95-99%) are comparable to the Atomic Absorption Spectrophotometry (AAS) method. Methods: Direct current polarography, model CL-357 and CL-25 (Elico Private Ltd, Hyderabad, India), Shimadzu AA 6300 spectrometer furnished thru a deuterium background corrector and hollow cathode lamp, at corresponding wavelengths (resonance line) with an air acetylene flame. The experimental guidelines remained those suggested by the makers. Results: The effect of NH4Cl between 0.1 to 0.7 M on the nature of CHW at DME, maintaining the concentrations of Mn(II) at 4.0 ppm and DTC at 3.0 mM (APP-DTC/ABP-DTC) then adjusting the pH to 6.6/7.2 (APP-DTC/ABP-DTC). The polarograms were well-defined in NH 4 Cl of 0.4/0.5 M for APP-DTC/ABP-DTC. The peak height decreased beyond this concentration and therefore 0.4/0.5 M (APP-DTC/ABP-DTC) concentrations was kept for more analysis. At fixed concentration of DTC, (3.0 mM APP-DTC/ABP-DTC) and (0.4/0.5 M for APP-DTC/ ABP-DTC) NH 4 Cl adjusting the pH to 6.6/7.2 respectively the metal ion concentration of the Mn(II) was adjusted between 0.05 to 7.0 ppm and results of CHWs were studied. The peak current increased linearly with Mn(II) concentration in the range 0.05 to 4.0 ppm for both DTCs. However, the sensitivity of the method was more with APP-DTC/ABP-DTC because of strong complex of Mn(II) and increased catalytic activity. Conclusion: The developed CHW method is highly sensitive, simple and spontaneous for the analysis of Mn(II) in environmental and biological samples. The polarographic reduction of Mn(II) in aqueous solutions in the attendance of DTC displays a catalytic wave as a role of pH, concentration of supporting electrolyte and metal ion. The graphs of catalytic signals as a role of the concentration of dithiocarbamate shows that the signals do not vary linearly with the concentration of dithiocarbamate which the characteristic of Brdicka CHWs. It is presumed that the dithiocarbamate complexes with metal ions involve adsorption process and can be described by a Langmuir adsorption isotherm and the plot of CL/ip Vs CL should be linear. The CHW method is free from interference effect avoiding the removal stages which made towards placing among utmost sensitive methods for the analysis of Mn(II) in different Environmental and Biological samples.

Primary-Secondary Wavelengths Spectrophotometric Determination Of Manganese In Environmental Water

Manganese Removal from Aqueous Solution Using a Thermally Decomposed Leaf

Partial least squares method-spectrophotometric determination of trace manganese, iron, copper and zinc

Rapid and green detection of manganese in electrolytes by ultraviolet-visible spectrometry to control pollutant discharge

Colorimetric detection of Mn2+ using silver nanoparticles cofunctionalized with 4-mercaptobenzoic acid and melamine as a probe.

Determination of Manganese(II) using Catalytic Hydrogen Wave (CHW) Technique in Environmental and Biological Samples

Enhancing Sensitivity of Manganese Detection in Drinking Water Using Nanomaterial AuNPs/GP

Electrochemical Detection of Manganese in Drinking Water with Chronoamperometry

Simple and affordable colorimetric sensing strips for quantitative determination of total manganese in porewater samples

The Determination of Mn(II) in Marine by Modified Potassium Periodate Oxidation Spectrophotometry

Use of L-arginine and its analogs to study nitric oxide pathway in humans.

Ultrasensitive and Selective Detection of MnO4− in Aqueous Solution with Fluorescent Microgels

Simultaneous Determination of Trace Manganese, Iron, Copper and Zinc Using Spectrophotometry Assisted by Artificial Neural Network Algorithm

The Study on Oxidation of As(III) to As(V) by MnO2 in Waste Water

Thermosensitive Fluorescent Microgels for Selective and Sensitive Detection of Fe3+ and Mn2+ in Aqueous Solutions

Incorporating Quartz Crystal Microbalance with Chronoamperometry to Enhance Manganese Detection Stability in Drinking Water

A modified spectrophotometry of micromolar H2O2 determination in iron-containing solutions with leuco crystal violet under both aerobic and anaerobic conditions

Development of a colorimetric sensor for selective manganese detection using green-synthesized silver nanoparticles from Withania somnifera

Electrochemical interference study of manganese and iron by multiplex method and the application for manganese analysis in drinking water

A Highly Sensitive and Selective Probe for the Colorimetric Detection of Mn(II) Based on the Antioxidative Selenium and Nitrogen Co-Doped Carbon Quantum Dots and ABTS•+

Enhanced Removal Of Chlorophene And 17 Beta-Estradiol By Mn(Iii) In A Mixture Solution With Humic Acid: Investigation Of Reaction Kinetics And Formation Of Co-Oligomerization Products