Abstract:Dimethyl sulfide (DMS) is the major biogenic volatile sulfur compound in surface seawater. Good quality DMS data with high temporal and spatial resolution are desirable for understanding reduced sulfur biogeochemistry. Here we present a fully automated and novel "microslug" gas-liquid segmented flow-chemiluminescence (MSSF-CL) based method for the continuous in-situ measurement of DMS in natural waters. Samples were collected into a flow tank and DMS transferred from the aqueous phase to the gas phase using a vario-directional coiled flow, in which microvolume liquid and gas slugs were interspersed. The separated DMS was reacted with ozone in a reaction cell for CL detection. The analytical process was automated, with a sample throughput of 6.6 h−1. Using MSSF for DMS separation was more effective and easily integrated with CL detection compared with the commonly used bubbling approach. Key parameters of the proposed method were investigated. The linear range for the method was 0.05–500 nM (R2 = 0.9984) and the limit of detection (3 x S/N) was 0.015 nM, which is comparable to the commonly used gas chromatography (GC) method and sensitive enough for direct DMS measurement in typical aquatic environments. Reproducibility and recovery were assessed by spiking natural water samples (river, lake, reservoir and pond) with different concentrations of DMS (10, 20 and 50 nM), giving relative standard deviations (RSDs) ≤1.75% (n = 5) and recoveries of 94.4–107.8%. This fully automated system is reagent free, easy to assemble, simple to use, portable (weight ~5.1 kg) and can be left in the field for several hours of unattended operation. The instrumentation can provide high quality DMS data for natural waters with an environmentally relevant temporal resolution of ~9 min.

Simple and affordable colorimetric sensing strips for quantitative determination of total manganese in porewater samples

8.2.2 A High Spatial Resolution MEA for Voltammetric Analysis of Trace Metals in Water Pollution Based on Partial Least Squares Regression

Ultrasensitive and Selective Detection of MnO4− in Aqueous Solution with Fluorescent Microgels

Rapid and green detection of manganese in electrolytes by ultraviolet-visible spectrometry to control pollutant discharge

Manganese Detection in Water Samples via Photometrix Colorimetric Analysis on Smartphones, by using Silver Nanoparticles Prepared from Okara Extract

Thermosensitive Fluorescent Microgels for Selective and Sensitive Detection of Fe3+ and Mn2+ in Aqueous Solutions

Colorimetric detection of Mn2+ using silver nanoparticles cofunctionalized with 4-mercaptobenzoic acid and melamine as a probe.

Electrochemical Detection of Manganese in Drinking Water with Chronoamperometry

Incorporating Quartz Crystal Microbalance with Chronoamperometry to Enhance Manganese Detection Stability in Drinking Water

Ratiometric fluorescence probe based on carbon dots and p-phenylenediamine-derived nanoparticles for the sensitive detection of manganese ions

Enhancing Sensitivity of Manganese Detection in Drinking Water Using Nanomaterial AuNPs/GP

Voltammetric Determination of Pb 2+ in Water using Mn‐doped MoS 2 /MWCNTs/Nafion Electrode Coupled with an Electrochemical Flow Analysis Device

Handheld detection strategy: Real-time on-site assay of Mn(VII) and GSH integrating ratiometric fluorescent carbon dots paper strip, smartphone, and 3D-printed accessory

Electrochemical interference study of manganese and iron by multiplex method and the application for manganese analysis in drinking water

Determination of Mn2+ in seawater used an in situ shipborne detection device coupled with the glassy carbon electrode

Development of a colorimetric sensor for selective manganese detection using green-synthesized silver nanoparticles from Withania somnifera

Electrochemical detection of manganese ions using aptamer-based layers

New methodological approach for deep penetrating geochemistry and environmental studies part 2: field determination of Co(II) /Ni(II) and Pb(II) /Zn(II) of on-site soil extractions by electrochemical stripping techniques

An ultrasensitive electrochemical sensor based on in situ synthesized manganese dioxide/gold nanoparticles nanocomposites for rapid detection of methylmercury in foodstuffs

Automated, high frequency, on-line dimethyl sulfide measurements in natural waters using a novel “microslug” gas-liquid segmented flow method with chemiluminescence detection

Dual-mode fluorescence and colorimetric sensing of sulfide anion in natural water based on near-infrared Ag 2 S quantum dots and MnO 2 nanosheets complex