Abstract:The effluent from the pulping of E. urophylla by alkali sodium sulfite chemi-mechanical process (AS - CMP) was characterized for its biodegradability by photosynthetic bacteria (PSB). Chemical coagulation post-treatment of biotreated wastewater was also studied. One-month continuous treatment in the laboratory indicated that the COD(Cr), BOD5 and SS removals in biotreatment stages reached 56%, 83% and 89% respectively, and the CH2Cl2 extractives decreased from 10.7 mg/L to 7.7 mg/L. In chemical coagulation post-treatment stage, the effects of process conditions, such as coagulant dosage, pH value and the coordinated coagulation-flocculation treatment of three kinds of coagulants on coagulation effectiveness were discussed. The optimum operating conditions were given. | The effluent from the pulping of E. urophylla by alkali sodium sulfite chemi-mechanical process (AS-CMP) was characterized for its biodegradability by photosynthetic bacteria (PSB). Chemical coagulation post-treatment of biotreated wastewater was also studied. One-month continuous treatment in the laboratory indicated that the CODCr, BOD5 and SS removals in biotreatment stages reached 56%, 83% and 89% respectively, and the CH2Cl2 extractives decreased from 10.7 mg/L to 7.7 mg/L. In chemical coagulation post-treatment stage, the effects of process conditions, such as coagulant dosage, pH value and the coordinated coagulation-flocculation treatment of three kinds of coagulants on coagulation effectiveness were discussed. The optimum operating conditions were given. | Eucalyptus urophylla-pulping effluent, produced by an alkali sodium sulfite chemical-mechanical process, was biologically treated with photosynthetic bacteria. After one month of laboratory treatment, biochemical oxygen demand (BOD5) and suspended solids decreased by 83% and 89%, respectively. CH2Cl2 extractives were reduced from 10.7 to 7.7 mg/L. Because the treatment could not remove color and reduced the chemical oxygen demand (CODCr) by only 56%, the effluent was subsequently treated by chemical coagulation-flocculation, using a combination of three different coagulants. The coagulation treatment, for which a pH range of 6.0-7.5 was suitable, removed 75% of the color, and further reduced CODCr and BOD5 by 63% and 59%, respectively.

Study on the bio-treatment of effluent from E. eucalyptus SCMP

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

Purification of AS-CMP effluent by combined photosynthetic bacteria and coagulation treatment

Micro-electrolysis treatment of eucalyptus CTMP effluent

Eucalyptus Chemimechanical Pulp Effluent Treatment with Composite Electrolysis Electrochemical Method and Mechanism Analysis

COD removal from expanded granular sludge bed effluent using a moving bed biofilm reactor and their microbial community analysis

Sulfanilic Acid Biodegradation and Resulting Microbial Communities Using Membrane Bioreactor

Three-dimensional fluorescence excitation-emission matrix (EEM) spectroscopy with regional integration analysis for assessing waste sludge hydrolysis treated with multi-enzyme and thermophilic bacteria

A feasibility study on treating eucalyptus CTMP effluents with an ultrafiltration and improved activated sludge

Eucalyptus CTMP Wastewater Treatment with Micro-Electrolysis Process

Research On Eucalyptus Ctmp Wastewater Treatment With Dynamic Composite Electrolysis Method

Study on the Treatment of the Sulfite Pulp CEH Bleaching Effluents with the Coagulation–anaerobic Acidification–aeration Package Reactor

Bio-discoloring of Effluent from Eucalyptus CTMP with White-rot Fungus

A study on the coagulation-anaerobic hydrolysis-aerobic process to deal with pulp CEH bleaching effluents

CTMP Wastewater Treatment with Compound Electrochemical-biochemical Method

Enhanced removal of contaminant using the biological film, anoxic-anaerobic-aerobic and electro-coagulation process applied to high-load sewage treatment

The Characteristics of AS-CMP Sulphonated Effluent of Eucalyptus and Its Pollution Load

Enhanced removal of contaminant using the biological film, anoxic–anaerobic–aerobic and electro-coagulation process applied to high-load sewage treatment

A Study Of Ctmp Wastewater Treatment With A Compound Electrochemical-Biochemical Method

Decolorization of Eucalyptus CTMP Chemical Pretreatment Effluent with Micro-Electrolysis Method

Elucidating the microbial communities and anaerobic mechanisms of a new biomass capable of capturing carbon and sulfur pollutants for sulfate-laden wastewater treatment