Abstract:Purpose - The purpose of this paper is to design a reasonable joining path and achieve assembly automation for multiple arc-shaped panels. A fuselage panel is primarily composed of skins, stringers, frames and clips. Both inserted and nested structures are adopted in the panels to improve the strength and hermeticity of the fuselage. Due to the complex structures and relationships, it is a challenge to coordinate the arc-shaped panels in the assembly process.Design/methodology/approach - A motion sequence model which achieves arc approximation based on the relative motion of multiple panels is established. The initial position of the panels is obtained by decomposing the computer-aided design model of the panels. Two translation rules, i.e. progressively decreasing translation and limited deformation translation, are applied to determine the moving path of the panels. If a panel is not at its path node, a search algorithm is used to find the nearest path node. Finally, the key algorithms are implemented in an integration system to promote joining automation of multiple panels.Findings - The zigzag path is effective for the joining of multiple panels with complex mating relationships. The automation of the join-separate-rejoin operations is time-saving and safety-assuring. The proposed method is demonstrated in practical engineering and a good efficiency is obtained.Practical implications - This method has been used in a middle fuselage assembly project. The practical results show that the zigzag path is convenient to be stored and reused, and the synchronous movements of multiple curved panels are precisely realized. Additionally, the posture accuracy of panels is significantly improved, and the operating time is reduced considerably.Originality/value - This paper gives a solution including path planning and process integration to solve the joining problem of multiple panels. The research will promote the automation of fuselage assembly.

On approximate development of aircraft panel surface

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Analytical and Experimental Study on Deformation of Thin-Walled Panel with Non-Ideal Boundary Conditions

Numerical Study on Predicting and Correcting Assembly Deformation of a Large Fuselage Panel During Digital Assembly

A Zigzag Path Based Joining Method for Fuselage Panels in Digital Assembly

Multi Load-Transmitting Device Based Support Layout Optimization for Large Fuselage Panels in Digital Assembly

Estimation and Alignment Method of Wing Position and Orientation for Aircraft Digital Assembly

Study on Analysis and Prediction of Riveting Assembly Variation of Aircraft Fuselage Panel

Optimal placement of measurement points on large aircraft fuselage panels in digital assembly

Finish Machining Condition Evaluation Technology for Aircraft Fuselage-wing Joints

Local-global Method to Predict Distortion of Aircraft Panel Caused in Automated Riveting Process

Evaluation of Residual Clearance after Pre-Joining and Pre-Joining Scheme Optimization in Aircraft Panel Assembly

Shimming Design and Optimal Selection for Non-Uniform Gaps in Wing Assembly

Joint Measuring and Evaluating Technology for Final Assembly of Aircraft Wing and Fuselage

A finite element model for analyzing curved surface sandwich panel forming

Experimental Investigation of Wing Accuracy Quantification using Point Cloud and Surface Deviation

Variational Progressive-iterative Approximation for Fairing Curve and Surface Generation

Optimized scanning path of wing panel based on genetic algorithm

Stripification of Free-Form Surfaces with Global Error Bounds for Developable Approximation

MachLine: Development of a Dirichlet-Based, Subsonic/Supersonic Panel Method for Unstructured Grids

Numerical Investigation of Control Surfaces Deflection