Abstract:The accurate measurement of mass flow rate is of vital importance with respect to production control in gas or oil fields equipped with chokes. A theoretical model to predict the flow regime and mass flow rate of multiphase flow through chokes was developed and derived on the basis of Perkins and Al-safran models. In the present model, the assumption of adiabatic condition between gas and liquid was adopted alternatively when fluids flow through the throat of chokes, which is different from the existing models. The slippage phenomena between gas and liquid have also been taken into consideration in this model. After analyzing, the Schuller slip model was found to be the most appropriate one, which is consistent with the work of Al-safran. Furthermore, the effect of the discharge coefficient Cd on the model calculation accuracy was discussed. The way to calibrate irreversible loss using the optimal discharge coefficient was recommended instead of a constant coefficient, which means that experiment should be carried out for a particular choke before use. Meanwhile, the present model was validated and compared with the models currently used in fields against both subcritical and critical experimental data. The model evaluation demonstrated that the present model was more reliable in predicting the critical pressure ratio yc, especially in large GLR condition. Meanwhile, the statistical error analysis of calculated mass flow rate showed that the average percent error (E1), absolute average error (E2) and standard deviation (E3) were 0.117%, 8.754% and 0.729% for the present model, respectively. Compared to other models, the present model prediction outperforms their predictions a lot. It indicated that the present model was more reasonable and reliable in predicting the mass flow rate of multiphase flow through chokes.

STUDY ON LUMPED PARAMETER APPROXIMATION MODELS OF DISTRIBUTED PROPELLANT FEEDLINES ——MODAL APPROXIMATION MODELS

Predicting Mean Profiles in Compressible Turbulent Channel and Pipe Flows

PIECEWISE APPROXIMATION STATE SPACE MODELS OF DISTRIBUTED PARAMETER LIQUID PIPES

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Identification of Characteristic Parameters and Structure Parameters in Pneumatic Servo Control

Modeling of a pneumatic system for high-accuracy position control

Precision Motion Control of an Independent Metering System with an Adaptive Piecewise Polynomial Valve Model

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

APPLICATION OF DIFFERENT TURBULENT MODELS IN CALCULATION OF FLOW RESISTANCE IN PIPELINES AND COMPARISON THEREOF

Research of Applicability of Several Turbulence Models in Numerical Simulation for Flow in Pipeline

Parametric Modeling of Flow Characteristics in Reciprocating Pump-Pipe Interaction System

The Research of 1D / 3D Coupling Simulation on Pump and Pipe System

Modeling Study on the Pressure Drop and Characteristic Velocity of the Pneumatic Logistics Transmission System

Simple Modeling Method for Pipelines Characteristics of an Underwater Device’s Hydraulic System

Aerodynamic Optimization Design of Turbomachinery with Approximation Model Method

Parameter Modification Model of Fluid Flow Rate for A Pneumatically-Actuated Pdms Membrane Microvalve

Dynamic finite element modeling and experimental research of the fluid-filled pipeline

Modeling of Multiphase Flow Through Chokes

Dynamic modeling and experimental study of a complex fluid-conveying pipeline system with series and parallel structures

Parameterized design method and verification of propeller single-passage domain

Modeling of Fluid Turbulence Modification Using Two-time-scale Dissipation Models and Accounting for the Particle Wake Effect