Abstract:Nonreacting swirling flow behavior through a novel double swirl burner has been investigated in this paper using Detached Eddy Simulation (DES) calculations and experimental measurements. The effect of mixing both the swirling flow of the inner jet (primary air or inner swirler) and the swirling flow of the annular jet (secondary air or outer swirler) on the flow structure has been analyzed. Moreover, pressure losses and flow field characteristics have been investigated at different inlet air mass flow rates and combustor diameters. Due to the drawbacks of general pressure loss to predict the pressure drop through high turbulence swirl flow as well as the complex geometry, the time-averaged viscous dissipation field function is used to predict the pressure drop through the burner. This function is based on the relationship between viscous dissipation and pressure losses. DES flow fields are compared with high-speed particle image velocimetry measurements at different inlet air mass flow rates. It is found that there is good agreement between numerical and experimental results, and both the central toroidal recirculation zone and the corner recirculation zone are well captured. In the case of a single inner swirler, the general pressure drop is very high compared to single outer and double swirl generators, and 84% of the inlet air pass through the outer swirler and just 16% of the air pass through the inner swirler in the case of a double burner (partially premixed). The time-averaged viscous dissipation field function is very important to identify the locations that lead to pressure drop inside the burner, which induces to select the appropriate design for the best performance. In addition, it is concluded that the performance of the double swirl burner is more efficient compared with the other two single swirlers in terms of pressure losses and flow structure.

Aerodynamic character of dual channel swirl burner

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Isothermal swirling flow characteristics and pressure drop analysis of a novel double swirl burner

Observations on the mixing process between an inner cold air stream and an outer swirling tubular flame stream

POD and DMD Analysis of Dynamic Flow Structures in the Recirculation Region of an Unconfined Swirl Cup

Numerical Simulation for Swirl Jet Flows to Change of Flaring Angle of Primary Air Tube

Effect of swirl number on the number of particle impacts near a swirl burner outlet

The Effect of Inner Secondary Air on the Flow Field of a Swirl Burner

Experimental study on cold two-phase flow in swirl burner exit

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Experimental Measurement of Gas-Solid Two-Phase Flow of a Swirl Burner by Optical Wave Method

Turbulence Characteristics of Swirling Reacting Flow in a Combustor with Staged Air Injection

Cold Model Experimental Study on the Concentrated Dual Register Swirl Burner

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Swirling flow and spray atomization interactions in a swirl cup airblast fuel injector: Outer swirler effect

Investigation of Flame and Flow Response in the Swirler with Different Divergence Cups and Central Body under External Excitation

The effects of swirl number on the combustion characteristics in an internally-staged combustor

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Design and Decomposition Analysis of Mixing Zone Structures on Flame Dynamics for a Swirl Burner